0
What else can I help you with?
Will mixing 12 gauge wiring with 14 gauge wiring cause a gfci to trip?
Mixing 12 gauge wiring with 14 gauge wiring can cause an imbalance in the electrical load distribution, which may cause a GFCI to trip. It is generally recommended to use the same gauge wiring throughout a circuit to avoid any issues with electrical systems.
What size breaker is used with 10 wire?
For a 10-gauge wire, a 30-amp breaker is typically used for general household wiring. It's always recommended to consult a licensed electrician or local building codes to ensure the correct breaker size for your specific situation.
Where can you find electrical wiring information for a 1972 mobile home particularly the gauge and type of wiring?
it will be printed on the wire
What is the right wire gauge for ordinary household wiring?
The most common sizes inside the house are: #14 for lighting #12 for receptacles #8 for range The most common for the service is a 4/0 aluminum (200 amp service) Pinky
Do the color of wiring nuts yellow and red have any particular meaning in electrical wiring?
Yes Yellow and Red are for minimum 2 wires and maximum four wires. Yellow are for 2 14 gauge wires, or 4 18 gauge Large Red are for 2 12 gauge or 4 14 gauge
What gauge wiring should be used for a house?
For a house, it is recommended to use 12-gauge wiring for general electrical circuits. This gauge is suitable for most household appliances and lighting fixtures.
What is 14 gauge wire used for in electrical applications?
14 gauge wire is commonly used for general household electrical wiring, such as lighting circuits and outlets. It is suitable for carrying moderate amounts of electrical current safely.
What is the correct baseboard heater wiring diagram for installation?
The correct baseboard heater wiring diagram for installation involves connecting the heater to a dedicated circuit with the appropriate voltage and amperage, using the correct gauge of wire, and following the manufacturer's instructions for proper installation. It is important to ensure that the wiring is done safely and in compliance with local electrical codes.
Why is temp gauge stuck on hot replaced thermostat and temp sensor?
This may sound like I think you are dumb, but I do not, I have been caught by each of these:Did you change the correct sensor? Both my cars and my truck have separate senders for the computer, the light and the gauge.Did you get the correct replacement part? An incorrect sensor can cause the gauge to: operate backwards, stick hot or cold, not operate at all. And to make this more fun the sender will look identical to the correct one except for the part number.Did you check the gauge while the sensor was unplugged? It should drop to cold when the sensor is unplugged. If not you have a bad gauge or a wiring fault, or both as a wiring fault can ruin the gauge.Final test, disconnect the gauge from the wiring at the gauge, does the needle drop? No then replace gauge. If does drop figure out where the incorrect indication is coming from.
Will mixing 12 gauge wiring with 14 gauge wiring cause a gfci to trip?
Mixing 12 gauge wiring with 14 gauge wiring can cause an imbalance in the electrical load distribution, which may cause a GFCI to trip. It is generally recommended to use the same gauge wiring throughout a circuit to avoid any issues with electrical systems.
What gauge wire is typically used in homes for electrical wiring?
The most common gauge wire used in homes for electrical wiring is 12-gauge wire.
What gauge wire should be used in a house for electrical wiring?
For electrical wiring in a house, typically 12 or 14 gauge wire is used. The specific gauge depends on the electrical load and circuit requirements.
What is the correct gauge wire for a car radio?
The correct GAUGE wire is 28 for a car stereo.
How do you spell guage?
The correct spelling is "gauge." It has five letters and is pronounced as "gayj."
93 Chevrolet Gas gauge stays on full?
The gauge, wiring or sending unit is bad.
Why would a gas gauge jump around and most of time read empty?
Fuel level sender (in tank) faulty. If replacement doesn't correct fault, check sender wiring back to instrument for poor connection. Finally, replace gauge.
What is the recommended thickness of 6 gauge copper wire for electrical wiring projects?
The recommended thickness of 6 gauge copper wire for electrical wiring projects is about 0.162 inches.
