6millimeter square.
You will need to use #8 wire.
No, it is not recommended to replace a 35 amp breaker with a 40 amp breaker for an AC unit. Breakers are designed to protect the circuit and the equipment, so using a higher rated breaker can lead to overheating and potential damage. It is best to use the correct amperage rated breaker for the equipment.
Depends on the wire size used in the circuit. If you use AWG # 14 wire you must use a 15 amp breaker. If it is wired with AWG # 12 wire then you use a 20 amp breaker. If a AWG # 10 wire is used then a 30 amp breaker is required. The breaker protects the wiring from overheating so you must use the proper size breaker for the wire used.
Look on the heater and see what amps it is pulling. That will determine the wire size and breaker size. It must be on a dedicated circuit. 15 amps = AWG # 14 wire with 15 amp breaker 20 amps = AWG # 12 wire with 20 amp breaker 30 amps = AWG # 10 wire with 30 amp breaker 40 amps = AWG # 8 wire with 40 amp breaker
No, electrical code typically requires that circuits be protected by a breaker that matches the wire size. A 30 amp breaker is typically used for circuits with larger wire sizes. For a 120V circuit, a 20 amp breaker is more suitable with appropriate wire size.
You will need to use #8 wire.
The recommended wire size for a 20 amp breaker is typically 12-gauge wire.
The appropriate wire size for a 25 amp breaker is typically 10 gauge wire.
The appropriate wire size for a 30 amp breaker is typically 10 gauge wire.
The recommended wire size for a 25 amp breaker is typically 10 gauge wire.
The recommended wire size for a 30 amp breaker is typically 10 gauge wire.
The recommended wire size for a 50 amp breaker is typically 6-gauge wire.
The recommended wire size for a 60 amp breaker is typically 6-gauge wire.
For a 30 amp breaker, you will need a wire that is at least 10 gauge in size.
The recommended wire size for a 40 amp breaker is typically 8 AWG (American Wire Gauge).
The appropriate wire size for a 40 amp breaker is typically 8 AWG (American Wire Gauge).
The recommended wire size for a 35 amp breaker is typically 8 AWG (American Wire Gauge) for copper wire.