0
What is the wire size needed to feed a 400 amp service with parallel copper?
Wiki User
∙ 6y ago
It depends on the length of the run
Wiki User
∙ 6y ago
Add your answer:
Earn +20 pts
What study of demographic is used to determine the natural resources that will be needed to feed the people in a region?
Demography is the study of human population dynamics and it is used to determine the Natural Resources that will be needed to feed the people in a region.
Can you run an additional breaker panel parallel to the existing one?
It is generally not recommended to run an additional breaker panel in parallel with an existing one. This can create potential safety hazards, overload circuits, and violate electrical codes. It is best to consult with a licensed electrician to properly assess the situation and determine the best course of action.
Can a 1500KVA transformer feed a 1600A 480V service?
No, a 1500KVA transformer is not large enough to handle a 1600A load at 480V. The transformer should have a higher kVA rating to support the current demand of 1600A. A transformer with a minimum capacity of 1920KVA would be needed for this application.
Can you run parallel number 6 wires to feed a 100 amp breaker?
Yes, you can run parallel wires to feed a 100 amp breaker. However, it is important to follow local electrical codes and regulations when doing so. It is recommended to consult with a licensed electrician to ensure the installation is done safely and correctly.
Can you use a double 30amp breaker to feed 2 15 amp?
no, load will brake at 30 not 15 as needed
For a parallel feed to a 1200 Amp service 3 phase what size is the grounding electrode to main service with 3 600 mcm parallel runs?
500 mcm
What size copper wire to use for a 100amp single phase three meter service feed from the riser?
A #3 copper conductor with an insulation factor of 90 degrees C is rated at 115 amps.
What is cross feed and longitudinal feed in lathe?
Longitudinal feed is parallel to the axis of rotation of the spindle. Cross feed is perpendicular.
What size wire is needed for 400 amp 480 volt service?
A 500 MCM wire with an insulation factor of 90 degrees C is rated at 430. Most 400 amp services will use parallel wires on each leg to feed the circuit. A 3/0 wire with an insulation factor of 75 and 90 degrees C is rated at 200 and 225 amps respectively. The insulation rating of these conductors will be 600 volts.
Can goats eat a feed with a high tolerance of copper?
No, goats cannot consume feed with a high tolerance of copper. Goats are sensitive to excess copper, which can lead to copper toxicity and health issues. It is important to provide goats with a balanced diet that meets their nutritional needs without exceeding safe levels of copper.
What gas in the air is needed for something to burn?
Oxygen is needed to feed the flame.
How much feed is needed to produce a lamb?
It requires 1,273 pounds of feed to produce a lamb
What is the minimum cable size required for 400Amps incoming supply?
A 600 MCM copper conductor with a insulation factor of 75 or 90 degrees C is rated for 420 and 455 amps respectively. To reduce the wire size from a single conductor, a parallel feed of 3/0 can be used.
What fitting will be used to connect the water service pipe to feed pipe for the house?
Water main coming into house usually 3/4" K copper pipe. Depending on local plumbing code, fitting usually is flared or soldered.
How much feed is needed to produce a hundred eggs?
It requires 50 pounds of feed to produce a hundred eggs
Why is GMO food important?
Some say it is important because it is needed to feed the world. Others believe it is not only not needed to feed the world, but is detrimental to the environment and possibly to animal and human health.
How much fried rice needed to feed 100 people?
Approximately 100 cups of rice will feed 100 people.
