answersLogoWhite

0

For a 30 amp circuit running 350 feet, it is recommended to use at least a 10-gauge wire to account for voltage drop over the distance. This heavier gauge wire will ensure the safe and efficient delivery of power over the longer distance.

User Avatar

AnswerBot

1y ago

What else can I help you with?

Related Questions

What size wire for 50 amp 3 wire pump 350 feet?

This is a voltage drop question. To answer this question the voltage of the pump must be stated


What size wire do you use for up to 350 feet for 100 amp service?

That can't be answered until you state the voltage.


What conduit size for three 350 kcmil xhhw wire?

2 1/2" EPVC schedule 40


What size wire is needed for a 150 foot 350amp 208V 3phase circuit?

A 500 MCM copper conductor will limit the voltage drop to 3% or less when supplying 350 amps for 150 feet on a 208 volt system.


What wire size is needed to 350 amp load for 100 feet?

#10 wire is good for 30amps; however it is wise and sometimes required to use an 80% load factor. If you need 30amps continuously you would want to use #8 wire, which is good for 40amps. #8 wire could safely run 32amps continuously, 40amps x 80% = 32amps.


How many yards in 350 feet?

350 feet = 116.666667 yards


What is the distance in feet of 350 kilometers?

350 kilometers = 1,148,293.96 feet.


How many feet in 350 meter?

350 metres = 1,148.3 feet


How do you solve 350 feet to yards?

350 feet=116.666667 yards


How many yards are in 350 feet?

Grab a calculator. There are 3 feet in each yard. If there are 350 yards then you need to multiply 350 times 3 (three feet for each yard). The answer is 1,050.


How many acres is 350 feet by 350 feet?

350 x 350 = 122,500 square feet. There are 43,560 square feet in one acre. 122,500 ÷ 43,560 = 2.81 acres.


What size service ground is needed for a 350 parallel service?

From the question it is hard to establish whether the service size is 350 amps or the service conductors are 350 MCM in parallel. If the service is 350 amps, the grounding conductor is #3 bare copper wire. Parallel 350 MCM conductors will allow for a 600 amp service. The grounding conductor for a 600 amp service is a #1 bare copper wire.