0
In the hot tub junction control box there should be three terminals. The terminal block might say line voltage. This is where the incoming "hot" wires connect. The red and black wires will probably be for the 240 volt pump motor and one of the two "hot" wires and the white wire will be used for the controls that control the pump.
What else can I help you with?
How do you connect timer white and black house wire with red black and white wires?
House wire is "line" Black & White house goes to Black & White of Timer; the "load" (e.g. Pond Pump, etc.) is connected to the Red & White. Specifically, put all 3 whites together (nut or terminal); House (source)(line) Black to Timer Black; and "load" Black to Timer Red. The Red wire is the "Timed" (switched) hot wire.
What is the red wire and what wire does it go with when there are three wires black red and white?
Red, white, and black are standard for a three-way switch (you have two switches that control the same fixture). You should also have a ground wire (copper, unsheathed). The black and red are negative, while the white is positive. It works pretty simply. When the switch is up, the black and white are linked, creating a circuit. When it is down, the red and white are linked. If both switches agree (both are red/white or both are black/white), then the circuit is completed and power flows.
Light switch has 4 wire colors red and white and green and black which is the hot wire?
You have a 3 way switch. Your black wire is the hot wire. Your green wire is the ground wire. Your red and white wires go to the light and other switch. You should have gotten a wiring diagram with your switch.
In the US where do the blue red green and white wires on a fan go to when the ceiling has red black bare copper and white wires?
Black to Black - Black from the ceiling is a hot wire and should be switched Red to Blue - Red wire is another hot wire and should also be switched White to White - White from the ceiling is the neutral and should not be switched. Your wall should have two switches, one will control the red wire, one will control the black wire. If you wire your fan as above, one switch will turn the fan on, the other will turn the light of the fan on.
Can you connect 2 wire to 3 wire house has black white red and ground Appliance has black white and ground?
It seems like you are describing the Red, Black, White and Ground in your electric panel. There is 240 VAC between Black and Red and 120 VAC between Black and White and 120 VAC between Red and White. The electric panel has two busses that supply 120 VAC on alternating breakers in your panel. Essentially, the Red turns into "black" in the panel for all practical purposes. If you have a 240 VAC circuit it essentially takes up to two vertical positions in your electric panel.
Where does the red wire go, to the white or black wire?
The red wire typically goes to the black wire.
Which wire does the red wire connect to, black or white?
The red wire typically connects to the black wire.
How do you connect timer white and black house wire with red black and white wires?
House wire is "line" Black & White house goes to Black & White of Timer; the "load" (e.g. Pond Pump, etc.) is connected to the Red & White. Specifically, put all 3 whites together (nut or terminal); House (source)(line) Black to Timer Black; and "load" Black to Timer Red. The Red wire is the "Timed" (switched) hot wire.
What is the red wire and what wire does it go with when there are three wires black red and white?
Red, white, and black are standard for a three-way switch (you have two switches that control the same fixture). You should also have a ground wire (copper, unsheathed). The black and red are negative, while the white is positive. It works pretty simply. When the switch is up, the black and white are linked, creating a circuit. When it is down, the red and white are linked. If both switches agree (both are red/white or both are black/white), then the circuit is completed and power flows.
How do you wire red white blue yellow and black to red white and black?
you dont
Is the white wire in the thermotat a neutral?
the thermostat has a black(line) wire to it, and a red wire going to it. the red wire then connects to the neutral wire. the black and red are like a leg switch.
Light switch has 4 wire colors red and white and green and black which is the hot wire?
You have a 3 way switch. Your black wire is the hot wire. Your green wire is the ground wire. Your red and white wires go to the light and other switch. You should have gotten a wiring diagram with your switch.
Which of the two wires is hot which is neutral?
If this is a home wiring question and the wires are black and white then black is Hot and white is Neutral. If you also have a red wire, it is the other hot wire, and either the black or the red wire to the white one would be 120 volts, and red to black would be 240 volts.
In the US where do the blue red green and white wires on a fan go to when the ceiling has red black bare copper and white wires?
Black to Black - Black from the ceiling is a hot wire and should be switched Red to Blue - Red wire is another hot wire and should also be switched White to White - White from the ceiling is the neutral and should not be switched. Your wall should have two switches, one will control the red wire, one will control the black wire. If you wire your fan as above, one switch will turn the fan on, the other will turn the light of the fan on.
Ignition wire color code and starter wire?
The ignition wire in a Nissan 350z is black and red. The starter wire is white/red and the second starter wire is white/green.
What is the proper sequence for connecting the black, white, and red wires in an electrical circuit?
The proper sequence for connecting the black, white, and red wires in an electrical circuit is to connect the black wire to the live or hot terminal, the white wire to the neutral terminal, and the red wire to the switched or load terminal.
Can you connect 2 wire to 3 wire house has black white red and ground Appliance has black white and ground?
It seems like you are describing the Red, Black, White and Ground in your electric panel. There is 240 VAC between Black and Red and 120 VAC between Black and White and 120 VAC between Red and White. The electric panel has two busses that supply 120 VAC on alternating breakers in your panel. Essentially, the Red turns into "black" in the panel for all practical purposes. If you have a 240 VAC circuit it essentially takes up to two vertical positions in your electric panel.
