0
Add your answer:
Earn +20 pts
2 percent grade is how much per foot?
2% grade is equal to a 1/4" per foot fall
How many inches per foot in a 2 percent slope?
Oh, dude, you're hitting me with some math now? Okay, okay. So, a 2 percent slope is like 2 inches of rise per 100 inches of run. And since there are 12 inches in a foot, you just divide 100 by 12 to get around 8.3 feet per foot on a 2 percent slope. Math is fun, right?
How much does 3 inch channel weigh per foot?
it comes in several weights per foot but most common is 5.4#/ft.
How much foot in a yard?
3 feet per yard
How much per foot does a 4x4 weigh?
It depends on what the 4x4 is made of.
2 percent grade is how much per foot?
2% grade is equal to a 1/4" per foot fall
How much is 1 percent per foot equal to?
1 percent of a foot is 0,3048 cm.
If a 50 foot pipe needs a 2 percent grade what is the difference in elevation?
2% grade is equal to 1/4" per foot or 1:50(metric)If you know the length and the grade and need the total fall:TF=l x g:. TF = 50' x 1/4"per foot (or 0.25)TF = 12.5" or 12'-6"To find the grade:g = TF / lTo find the length:l = TF / g
How much is gutters per feet?
The cost of gutters per foot varies from $3-25 per foot.
Concrete costs per square foot?
how much does concrete cost per square foot
How much per square foot to install base board moulding?
Not enough information to answer this question! anyway, It's usually not priced by the sq ft, but by the lineal ft. In Nevada for the 3 or four inch paint grade base the piece price was about 6 to 10 cents per foot. for stain grade base the price varies widely depending on the height, type of o.s. corners and many other factors. The price can vary from 6 cents per foot to well over a buck a foot.
How much do does 12 inch PVC pipe cost per foot?
about 25 bucks per foot .
If tape costs 17.80 for 60 yards how much does it cost per foot?
0.0988 per foot
How much rent does Winn-Dixie pay per square foot?
hoiw much does winn dixie pay per square foot
How much fall do you need for a 4 inch drain line?
2% (1/4" per foot) unless first approved by your plumbing inspector. If there is a lack of grade to allow for the fall you may be allowed to upsize the drain to 6" and run it at 1% (1/8" per foot)
What is the correct grade of toilet plumbing lines to septic system?
1/8th of an inch per foot
How much does strong wood per square foot cost?
'bout 7 swags per square foot
