0
A bath is filled with 40 liters of hot water then 2 liters of ice are added what is the resulting volume?
Wiki User
∙ 15y ago
The answer is 40 litres. The trick of the question is that it says the bath has been FILLED with 40 litres of water, therefore, if you add anything else, it'll spill over.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
How many liters must be added to 637 liters to make one kiloliter?
363 liters
How many liters of a 20 percent solution of acid should be added to 10 liters of a 30 percent solution of acid to obtain a 25 percent solution?
10 liters.
What is the difference between perimeter area and volume?
perimeter is all the sides added, area is the base times the height, and volume is on a prism u multiply the three different measurements
If a bucket is 720g and 5 and a half liters of water was added the total mass would be?
1235g because 720 + 5 and a half = 720.5 = 1.235kg = 1235g
When A number is less than but more than 40 . it is divisible by 4 and when added to 19 what will be the resulting answer?
A number cannot be "less than but more than 40".
How many liters must be added to 637 liters to make one kiloliter?
363 liters
What is the volume of sugar and water mixture?
The volume of a sugar and water mixture is less than the volume of each substance alone because when water is added to sugar, water fills in the little spaces between the particles of sugar, resulting in a lower volume.
How many liters should be added to 8.24 liters to equal 10 liters?
1.76 litres
How many milliters of soup needs to be added to 4.56 liters to make 6 liters?
1,440 ml needs to be added.
How do you measure length mass and volume?
judlekfj Metric system: Length-meters Mass-grams Volume-liters Sometimes "milli" "centi" or "kilo" are added. "Mlli"-0.001 (1,000th) "Centi"-0.01 (100th) "Kilo"-1,000
How much should be added to 2.95 liters to make 3 liters?
0.05 litres.
How many liters of water must be added to 7 liters of a 20 percent acid solution to obtain a 10 percent acid solution?
7 liters of a 20% acid solution consists of 1.4 liters of acid (20% of the total volume) mixed with 5.6 liters of water (80% of the total volume). The amount of acid isn't going to change in the new solution. You are just going to add enough water to make it a 10% solution instead of a 20% solution. So it will be more dilute. That means that 1.4 liters of acid will represent 1/10 of the volume of the new solution. So the total volume of the new solution will be 10 x 1.4 or 14 liters. The amount of water in the new solution will be 14 - 1.4 = 12.6 liters. That is a difference of 12.6 - 5.6 = 7 liters from the amount of water you started with. So you need to add 7 liters of water to the original 20% solution to make it a 10% solution. This makes sense because if you double the amount of the mixture from 7 liters to 14 liters and the amount of acid is unchanged, the solution will be half as strong.
What is 600 ml added to 1.9 liters?
2.5L
What does 6000 Grams minus 3.5 Liters equal?
It is a sum that cannot be done. A gram is a measure of mass while a litre is a measure of volume. The two cannot be added or subtracted in any sensible way.
An ordinary glass is filled to the brim with 350 mL of water at 100 C If the temperature decreased to 20C how much water could be added to the glass?
Difference in volume = (initial volume) (coefficient of volume expansion of water) (difference in temperature) coefficient of volume expansion of water=0.0002ml/degree celsius (not sure about the value. Better get help from a teacher.)
In ethanol precipitation natrium acetate is added in 0.1 volume if wrongly added the volume to 1volume what will happened?
how about the countermeasurement for that?
When a positive integer is added to an integer what is the resulting integer?
The resulting integer is positive seen as they're both positive.
