4mm is about 0.157480315 inches, *64 is just over 10, so 10/64 (5/32) is the closest fractional size.
4mm = 4/25.4 in = 40/254 = 20/127 inch.
There is no such thing as a USA standard. 4mm is the same length as 0.16 inches, approximately.
1/16 inch = (1/16 * 25.4) = 1.5875 mm so, 4 mm = 4 / 1.5875 = 2.5197 sixteenths of an inch
all of the people below are right but you probably still dont understand am i right 183 cm is equal to 6ft 183 cm = 6.00394 ft subtracting 6 leaves us with 0.00394 foot. multiplying by 12 leaves us with 0.0472 inch. so one answer is 6 ft 0.0472 inch. convert .0472 inch to 64ths by multiplying by 64 to get 3 or about 6 ft 3/64 inch it is exactly 6 ft because 183 cm is equal to ABOUT 72 inches which is 6 ft!
You can't. Square inch is a measure of area and inch is a measure of length.
4mm = 4/25.4 in = 40/254 = 20/127 inch.
What is the faction for 0.070? 64ths inch
4mm is 0.15748032 of an inch.
Fractions of an inch. A "50" is 50/64ths of an inch.
8
17/64ths of an inch for steel
64
There are 25.4mm to one (1) inch, so there would be approximately six (6) 4mm beads per inch. If buying a 16" hank of 4mm bicone beads, you would be buying approximately 100 4mm beads.
Pretty close to both 5/64ths and 2mm. Definitely not exact though.
7/64ths of an inch, or .109375 inches, or 2.77 mm.
There is no such thing as a USA standard. 4mm is the same length as 0.16 inches, approximately.
4mm is 11/64th's of one inch Direct Conversion Formula 4 mm* 1 in 25.4 mm = 0.157480315 in