Once you multiply the length in metres by the depth in metres, the answer will be measured in square metres, e.g. 4 metres X 5 metres = 20 square metres.
about 5
Length X Width X Depth of the tank in centimeters, divided by 1000.
A square meter is a unit of area, not volume, so it doesn't directly convert to gallons. Gallons are a unit of volume, typically used to measure liquids. To convert square meters to gallons, you would need to know the depth or height of the area in meters and then calculate the volume in cubic meters. Once you have the volume in cubic meters, you can convert that to gallons using the conversion factor that 1 cubic meter is approximately equal to 264.172 gallons.
The question cannot be answered. 44 square foot is a measure of area in 2-dimensional space. 2-d space cannot have length, width and epth = 3 dimensions!
Block being a box: Height * Length * Depth = Volume Giving the three dimensions available.
Measure the depth and the length and multiply the two numbers.
To calculate cubic meters, you would multiply the length, width, and height of an object in meters. The formula is: Volume (m³) = Length (m) x Width (m) x Height (m). Make sure all measurements are in meters before performing the calculation.
Multiply the area of the water (in square meters) by the average depth (in meters). Then divide by one thousand to get the volume in liters. For a smaller puddle, multiply the area in square centimeters by the average depth in centimeters; then multiply by one thousand.
To calculate the amount of topsoil needed, you can use the formula: volume = area × depth. For 28 square meters at a depth of 2 inches (which is approximately 0.0508 meters), the volume would be 28 × 0.0508 = 1.4224 cubic meters. Therefore, you will need about 1.42 cubic meters of topsoil to cover 28 square meters at a depth of 2 inches.
Area = length x width = 3 x 6 = 18 square meters, regardless of the depth Volume = area x depth = 18 x 0.5 = 9 cubic meters
90 square meters
The area is 3m * 2.5m = 7.5 m2. The depth of the pool is irrelevant to its area.
The depth? That must be the length inside: 60 meters.
To convert square meters to cubic meters, you need to know the third dimension. If you are converting a two-dimensional area (square meters) to a three-dimensional volume (cubic meters), you would need to know the height or depth. Without that information, you cannot accurately convert 200 square meters to cubic meters.
To convert meters to acres, first calculate the area in square meters by multiplying width (33m) by depth (27m) which equals 891 square meters. Then convert square meters to acres by dividing by 4046.86 (conversion factor), which gives approximately 0.22 acres.
This is not a valid conversion. Cubic units is a measure of volume while square units is a measure of area. Generally, volume is determined by multiplying length x width x depth. Area is normally determined by multiplying length x width.
The average depth is 55 meters