The conversion fraction is 1/12.
The conversion factor is 1 inch = 2.5 cm So first you would need to convert the feet with which you are beginning into inches. There are 12 inches in a foot, so multiply 6.1 feet by 12 inches which will give you 73.2 inches. Then multiply 73.2 inches by 2.5 cm (see conversion factor above) which gives you 183 centimeters.
To convert 158 cm into inches, you would use the conversion factor of 1 inch being equal to 2.54 cm. Therefore, you would divide 158 cm by 2.54 to get the equivalent in inches. 158 cm is approximately equal to 62.2 inches. This conversion is important for luggage requirements as some airlines specify dimensions in inches rather than centimeters.
Multiply by 25.4 to convert from inches to millimetres. Divide by 1 million to convert from millimetres to kilometres.
25.4 cm = 10 inches
Foot-pounds
The conversion fraction is 1/12.
To convert inches of Mercury to pascals, use the conversion factor 1 inHg = 3386.39 Pa. Multiply the value in inches of Mercury by this conversion factor to get the equivalent value in pascals.
The conversion factor to convert inches to "Nominal Bore" (NB) is 25.4 mm per inch. NB sizes are based on the internal diameter of a pipe, and they do not directly correlate to inches.
The conversion factor is 39,370.1 so multiply .0000508 by 39,370.1 to get inches.
You multiply it by it's conversion factor. For example, the conversion factor for feet to inches is 12. So 4 feet is 48 inches because 4*12 = 48
39 inches = 0.99 m
1 in = 2.54 cm. To convert 15 inches to centimeters, you would set it up as: 15 in x (2.54 cm/1 in). This will give you the equivalent length in centimeters (15 in = 38.1 cm).
To convert knots to inches per second, use the conversion factor of 1 knot = 1.68781 inches per second. Multiply the speed in knots by this conversion factor to get the equivalent speed in inches per second.
You look up the conversion factor, then either multiply or divide by that conversion factor. example: an inch has 2.54 cm., so to convert from inches to cm. you multiply by 2.54; to convert from cm. to inches, you divide by 2.54.
Convert feet and inches to inches plus inches. Then use the cm per inch conversion factor.
To convert square millimeters (mm^2) to square inches (in^2), you can use the conversion factor of 1 mm^2 = 0.00155 in^2. Simply multiply the number of square millimeters by this conversion factor to get the equivalent area in square inches.