1gsm=0.14micron
178gsm=24.92 micron
You cannot. gsm, or grams per square metre, are a measure of the mass of a unit area of paper (usually). There is no simple relationship between this measure and the thickness of the paper - which would be measured in microns.
150 GSM
8
150
It depends on the density per unit area.
please convert 140 microns to GSM
350
To convert grams per square meter (gsm) to microns, you need to know the density of the material. Without that information, it's not possible to provide an accurate conversion. The conversion formula is: (gsm / density) * 1000 = microns.
To convert microns to grams per square meter (gsm), you need to know the basis weight of the material in question. The basis weight is the weight in grams of one square meter of the material. Once you have the basis weight, you can use the formula: gsm = (basis weight in g/m²) / (thickness in microns). So, without the basis weight, it is not possible to accurately convert 100 microns to gsm.
The term "gsm" stands for grams per square meter, which is a measure of paper weight. To convert 80 gsm to microns, you can use the approximate conversion factor where 1 gsm is roughly equivalent to 0.001 millimeters or 1 micron. Therefore, 80 gsm is approximately equal to 80 microns.
To convert grams per square meter (gsm) to microns, you can use the density of the material. For paper, a common approximation is that 1 gsm is roughly equivalent to 1 micron in thickness. Therefore, to convert 30 gsm to microns, you can say it is approximately 30 microns thick, assuming the density is similar to that of standard paper. However, if the material's density differs, you would need to adjust the calculation accordingly.
You cannot. gsm, or grams per square metre, are a measure of the mass of a unit area of paper (usually). There is no simple relationship between this measure and the thickness of the paper - which would be measured in microns.
To convert microns to grams per square meter (GSM), you can use the general conversion factor where 1 micron is approximately equal to 1.48 GSM for paper. Therefore, 50 microns would be roughly 74 GSM (50 microns × 1.48 GSM/micron). Keep in mind that this is an approximation and actual GSM can vary depending on the material.
To convert grams per square meter (gsm) to microns, you can use the formula: 1 gsm = 1 micron for a material with a density of 1 g/cm³. Therefore, 400 gsm is equivalent to 400 microns, assuming the material has a similar density. If the density differs, the conversion would vary accordingly.
To convert microns to grams per square meter (gsm), you can use the formula: gsm = microns × density factor. For paper, a common density factor is around 1.3, so 230 microns would be approximately 299 gsm (230 × 1.3). This value can vary slightly based on the specific type of paper and its density.
150 GSM
Micron (µm) and GSM (Grams per Square Meter) are units of measurement for thickness and weight, respectively. To convert microns to GSM, you would need information about the material's density. The formula for this conversion is: GSM = (Microns * Material Density) / 10.89 Without knowing the material's density, it's not possible to directly convert microns to GSM. So, you'd need to obtain the density of the material in question to make this conversion. The formula assumes that the density is in grams per cubic centimeter (g/cm³). Once you have the density of the material, you can plug it into the formula to convert any micron thickness to GSM.