0
Add your answer:
Earn +20 pts
Convert 20 newton meters to foot pounds?
14.75 ft/lbs
How many lbs will a 4.3 cu ft hold?
search engine says that: 1 ft^3 = 62.42797 lbs; so, 4.3 cubic ft = 268.440271 lbs; forgive me.
What is the multiplicative inverse of four and one ninth?
First convert it to an improper fraction: 4 1/9 = 37/9.Then just exchange the numerator and the denominator: 1 / (37/9) = 9/37.First convert it to an improper fraction: 4 1/9 = 37/9.Then just exchange the numerator and the denominator: 1 / (37/9) = 9/37.First convert it to an improper fraction: 4 1/9 = 37/9.Then just exchange the numerator and the denominator: 1 / (37/9) = 9/37.First convert it to an improper fraction: 4 1/9 = 37/9.Then just exchange the numerator and the denominator: 1 / (37/9) = 9/37.
What is 37 mm convert in meter?
37 millimeter converts to 0.037 meters.
Convert 12ft by 14ft into square feet?
How to convert 12 ft x 14 ft into square feet
How dou you convert ft. lbs. to in. lbs.?
multiply ft lbs by 12 and you'll have inch lbs.
Convert 14.5 ft-lbs to inches lbs?
To convert 14.5 ft-lbs to inch-lbs, multiply by 12 since there are 12 inches in a foot. 14.5 ft-lbs * 12 = 174 inch-lbs.
How do you convert Ft pounds to In pounds?
To convert foot pounds to inch pounds, multiply by 12.10 ft/lbs is 120 in/lbs.To convert foot pounds to inch pounds, multiply by 12.10 ft/lbs is 120 in/lbs.
How do you Convert In lbs to lbs?
You can convert inch/lbs to ft/lbs as such. 12 in/lbs = 1 ft/lb You cannot convert in/lbs to pounds as they are not compatible. in/lbs is a measure of torque or pulling power. Pound is a measure of dead weight. The two are not convertible.
How to Convert 106 in lbs to ft lbs?
Divide 106 by 12.
How many square ft are in 37 linear ft?
37 linear ft. simply means 37 ft. long. You cannot convert a single linear measurement to an area.
How do you Convert lbs ft to in lbs?
1 lb foot = 12 inch lbs......Seriously.
What does 72 in pounds convert to in ft pounds?
6 Ft lbs....It works just like a ruler (12 in = 1 ft)
What is the torque specs for a 96 Chevy s-10 2.2L?
Camshaft sprocket bolt 96 ft lbs crankshaft pulley bolt 37 ft lbs crankshaft pulley/hub to crankshaft bolt 77 ft lbs cylinder head bolts step 1 long bolts 46 ft lbs short bolts 43 ft lbs step 3 tighten all bolts an additional 90 degrees intake manifold 24 ft lbs oil pump bolt 32 ft lbs rocker arm studs 37 ft lbs
What would 15000 pounds per square inch equal in foot pounds for torque?
To convert in. lbs. to ft. lbs. you just simply multiply the in. lbs. by 0.08333 to get ft. lbs. 15000 in. lbs. x 0.08333 = 1249.95 ft. lbs.
What are the torque specs on a 3.8 Pontiac supercharger?
37 ft. lbs to 120 degress
How do you convert RPM to Nm?
You cant. One is a measure of rotational speed and the other is a measure of applied torque. You could convert Nm to Ft-lbs or In-lbs.
