55 psig +15=70
55 of 60 can be written as a fraction (55/60) and reduced to its lowest term (11/12). Or to convert it to a decimal or percent, divide 55 ÷ 60 = .9166666 or .917% (rounded)
Acceleration is zero since 55 mph is velocity and it is constant. Acceleration is defined as the rate of change in velocity. The speed is the absolute value of velocity so it is also 55.
To convert decimeters to meters, you need to divide by 10 since there are 10 decimeters in 1 meter. Therefore, 55 decimeters is equal to 55/10 = 5.5 meters.
Well, isn't that just a happy little question! To convert inches to feet, you simply divide the number of inches by 12, because there are 12 inches in a foot. So, to write 55 inches in feet, you would divide 55 by 12, which equals 4 feet and 7 inches. Just remember, there's no mistakes in art or math, just happy little accidents!
55 mi * 1.609 km/1mi = 88.49 km 55 mi/hr = 88.49 km/hr The formula to convert miles to km 55 mi * 63360 in 1 mi * 2.54 cm 1 in * 1 km 100000 cm = 88.51392 km
55% = 0.55
55% = 55/100 = 11/20
You don't!55% means 55/100 = 55/100Which reduces to the fraction,11/20=====
55 cm is 1.8 feet.
The answer is -218.15 C (approx.). The Kelvin scale starts at absolute zero and is used in scientific laboratories. Celsius is for general use and set 0 and 100 as melting and boiling point of water respectively. To convert from K to C, subtract 273.15 from K.
absolute pressure of liquid = atmospheric pressure (P₀) + (relative density (ρ) of liquid x height of liquid x gravitational acceleration) P₀ = 103000 Pa ρ of sea water at 15°C = 1025 kg/m³ h = 55 m g = 9.81m/s² Answer = 103000 Pa + (1025 kg/m³ x 9.81 m/s² x 55 m) Answer = 6.56 x 10^5 Pa (Sorry about using the carat in signifying the scientific notation, but apparently I cannot find a way to type a superscript 5 using code.)
60 minutes in an hour 55/60 Numerator = 55 denominator = 60 55/60 = 11/12
To convert 0.55 to percent multiply by 100: 0.55 × 100 = 55%
The suction pressure required to maintain a 40 degree evaporator coil temperature depends on the refrigerant being used, as different refrigerants have different pressure-temperature characteristics. A typical range for R-22 refrigerant would be around 55-60 psig. It is important to consult the specific pressure-temperature chart for the refrigerant being used.
55 cubic meters = 1,942.307 cubic feet.
relative is 55 miles south of baghdad, absolute is 32 degrees north, 45 degrees east.
what is 55-17