You cannot without knowing he linear density of the strip.
You multiply the volume of the gas by its density. The volume will depend on the specific gas, and on the pressure and temperature of the gas. As an example, a cubic meter of air has a mass of approximately 1.2 kg/m3. For other gases, the numbers may be quite different.
It's about 136lbs The formula to convert kg to lbs68 kg* 2.2046 lbs 1 kg = 149.9143383 lbs
You cannot convert bearing weight or pressure to a linear distance.A gram is equal to 0.0022 pounds. For these purposes, a kilogram (1000 g) is often more usable(1 kg = 2.2 pounds)A square meter is equal to about 1.196 square yards. A square yard is 0.836 square meters.- To convert GRAMS PER SQUARE METER to GRAMS PER SQUARE YARDmultiply by 0.836- To convert GRAMS PER SQUARE METER to POUNDS PER SQUARE YARDmultiply by 0.001843- To convert KILOGRAMS PER SQUARE METER to POUNDS PER SQUARE YARDmultiply by 1.843
18 kg
You cannot without knowing he linear density of the strip.
How to convert Cubic meter to BTU
haven't seen the answer yet???
1 gram = 0.001 kg 14 grams = 0.014 kg 0.014 kg/meter sq = 14 grams/meter sq
1mtr 25x3 cu = 0.750 kg.
Times the number of kilograms by one thousand.
Measure the mass (in kilograms) and length (in metres) of the strip. Divide the first by the other.
wire weight = material_density * 3.14159 * (0.5 * cable_diameter)² * cable_length example for copper with 152 meter length: ---------------------------------------- material_density for copper = 8960 kg/m³ cable_diameter=0.006 meter cable_length=152 meter weight of wire = 8960 kg/m³ * 3.14159 * (0.5 * 0.006)² * 152 = 38.51 kg lenght and diameter must be calculated in "meters" density must be in "kg/m³"
The weight of 50x6 copper flat per meter can be calculated by first finding the volume of the flat bar (50mm width, 6mm thickness, and 1000mm length) in cubic millimeters, then multiplying it by the density of copper (8.96 g/cm3) to get the weight in grams per meter. Finally, convert the weight from grams to the desired unit, such as kilograms or pounds.
1 kg/cubic metre = 77.853 pounds/ cubic foot.
haha...pwede bang convert ung length to weight..???
Grams are a measure of weight, a square meter is a measure of area, and a cubic meter is a measure of volume. These are not comparable.