If length and width are both measured in meters, then if you multiply them together you will have a square meter. If they are not measured in meters, you will have to convert them to meters first.
If it is a quadrilateral, you take the length times the width.
420 square meters
That's very easy. The dimensions of a square with an area of A = 1 m² is 1 meter in length and 1 meter in width.
Convert that to square feet. As a reminder, an acre is 43,560 square feet. Then, choose any width you like; divide the number of square feet by that number to get the corresponding length (for a rectangular area).
Well, darling, if we're talking about a square, the length and width of 1000 square meters would be the square root of 1000, which is approximately 31.62 meters. So, the length and width would both be around 31.62 meters. Hope that clears things up for you, sugar!
Make sure both length and width are measured in meters and multiply. The unit with be the area in square meters. The length and width alone can't be square measurements because they are one dimentional
a square meter equals a bunch of things. What were you looking to convert it to? feet, inches, miles, centimeters?a square meter: is a square with length and width both 1 meter long.
A meter is equal to no square meters:a meter, as a measure of length, has no width therefore its area (in square meters) is: length x 0 = 0 square meters.
To convert linear meters to square meters, you need to know the width of the material in linear meters. If the width is 1 meter, then 1 linear meter equals 1 square meter. If the width is different, you would multiply the width by the linear meters to get the square meters (Square Meters = Width x Linear Meters).
multiply them
A 1 meter square is an area with a length of 1 meter and a width of 1 meter.
1 Square Meter is the area enclosed by a length of 1 meter and a width of 1 meter. It is equal to 11.111... square feet.
To convert cost per square meter to cost per lineal meter, you need to consider the dimensions involved. The cost per square meter represents the cost of a two-dimensional area, while the cost per lineal meter represents the cost of a one-dimensional length. To make this conversion, you would need to know the width of the material in meters. Then, you can divide the cost per square meter by the width to get the cost per lineal meter.
There is no answer to this, a "square" (I assume a square meter) is a measure of area (2-dimensions), whereas a cubic meter is a measure of volume (3-dimensions).E.g.Suppose a piece of wood has a length and width of 1 meter each. This makes the wood 1 square meter in size.If you take 6 of these pieces of wood and build a box, the box will have length, width, and height of 1 meter (i.e. a cube). The box has a volume of 1 cubic meter.
im bored are you
To convert running meters to square meters, you need the width of the material. Multiply the running meters by the width in meters to get the square meters. For example, if you have 10 running meters and the material is 1 meter wide, you would have 10 square meters (10 meters x 1 meter = 10 square meters).
A millimeter is a unit of length and a square meter is a unit of area, so they can't be converted from one to another. If you mean 1500 square mm, we can convert that to square meters in the following way: a square meter has 1000 mm on a side, so the total area is just that squared, or 1,000,000 (1 million) square millimeters per square meter. For the final step, divide 1500 by 1000000 to get .0015 square meters.