About 2 1 pound per square inch = 2.0362... inches of mercury
One inch of mercury is equal to 33.9 millibars. So: inches of mercury x 33.9 = millibars.
The answer will depend on what it is that you wish to convert into PSI. You cannot. Inches are a linear measure, PSI (pounds per square inch) is a measure of pressure. The units are incompatible.
Inches of water x 0.03613 equals pounds per square inch (psi).
You cannot convert cubic inches to inches. Cubic inches are units of volume and inches are units of length.
You can convert inches of Mercury (inHg) to pounds per square inch (psi) by dividing the inHg value by 2.036. This conversion is based on the relationship between pressure in units of inches of Mercury and pounds per square inch.
To convert psi to inches of mercury, multiply the psi value by 2.036. Therefore, 12.6 psi is equivalent to approximately 25.65 inches of mercury.
To convert psi to inches of mercury absolute, divide the psi value by 2.036. In this case, 57 psi divided by 2.036 is approximately 27.97 inches of mercury absolute.
14.37 psi is 0.20317789 inches of mercury.
30 inches of mercury = 14.73 psi (1 inch of mercury = 0.491 psi So, 30 x 0.491 = 14.73).
Inches of mercury x 0.4912 equals psi
Psi (pounds per square inch) and inches of Hg (inches of mercury) are both units of pressure measurement. To convert between them, you can use the conversion factor that 1 psi is approximately equal to 2.036 inches of Hg. This conversion factor allows you to relate pressure values in psi to inches of Hg and vice versa.
kPa x 0.2953 = inches of mercury
Multiply inches of mercury by 0.033421057 to get atmospheres.
About 2 1 pound per square inch = 2.0362... inches of mercury
Multiply by 0.036 http://www.enercongroup.com/conversion_factors.htm One PSI is equal to 27.7 inches of water column
To convert inches of Mercury to pascals, use the conversion factor 1 inHg = 3386.39 Pa. Multiply the value in inches of Mercury by this conversion factor to get the equivalent value in pascals.