You will need to know the height and diameter of the cylinder. Then multiply pi (3.14159) by the square of the radius (r= exactly half of the diameter) , and then multiply that by the height.
V = πr²h
Example: The cylinder is 12 inches in diameter, and 20 inches tall
V= (3.14159 × 6²) × 20
(3.14159 × 36) × 20
113.097 × 20 = 2261.94 in³
Volume of a cylinder = pi*(radius)2*(height) where pi = 22/7
Volume of a cylinder = pi*radius2*height
Pour it into a graduated cylinder and read off the volume.
Volume in cubic feet = cross-section area*length
Volume = (height)(area base)
The volume of any cylinder is (pi) x (radius of the circular end)2 x (length of the cylinder)
The volume of displaced water for a metal cylinder with a volume of 50cm3 is: 13,210 US gallons of water or 11,000 UK gallons of water.
The reading on the graduated scale is taken before and after the metal is lowered into the cylinder . The second reading is subtracted from the first. This gives the volume of the metal in cubic centimetres.
v=l*b
Volume of cylinder: base squared times length
Well, first you need to gather more information. Density= Mass/Volume, so you will need to find the mass in grams of this metal pipe and then calculate the volume. I am assuming that the pipe is going to be a nice even cylinder, so use the circular cylinder volume formula. Then, divide mass/volume, and your answer will be in g/cm3.
Volume of a cylinder = pi*radius2*height in cubic units
The volume of the metal cylinder is 21.4mL - 15mL = 6.4mL. This is the water displacement method for determining the volume of an irregular solid.
Volume of a cylinder in cubic units = piradius2height
The diameter, alone, is not enough to find the volume of a cylinder. You need the height as well. > Where pi = 3.1416, and d = cylinder diameter cylinder volume = pi * (d/2)2 * length of cylinder
you listen to it
Density = Mass/Volume, correct. However, with a cylinder, you have to find the volume. In order to find the volume of a cylinder use the equation PiR2 * H where "R" is the radius (Diameter/2) squared.