0
Well, honey, it all depends on how fast those little legs of yours can move! On average, a person walks about 3.1 miles per hour, which is roughly 5148 feet per hour. So, if we do the math, it should take you around 14 minutes to strut your stuff across 1224 feet. But hey, who's counting? Just enjoy the stroll!
Add your answer:
Earn +20 pts
How long would it take to walk 174 ft?
40 seconds @ 3 miles/hour
How wide is 25.5 cu ft in inches?
Any value greater than 0 inches.(If the width were 0 in, then the volume would have to be 0 cu in.)Assuming a cuboid:volume = length × depth × width→ width = volume ÷ (length × depth)The width is dependent upon the length and depth (and volume).1 ft = 12 in→ 1 cu ft = 1 ft × 1 ft × 1 ft = 12 in × 12 in × 12 in = 1728 cu in→ 25.5 cu ft = 25.5 × 1728 cu in = 44064 cu inExamples:Let length = 1 in, depth = 1 in→ width = 44064 cu in ÷ (1 in × 1 in) = 44064 inLet length = 1224 in, depth = 9 in→ width = 44064 cu in ÷ (1224 in × 9 in) = 4 inLet length = 1224 in, depth = 0.009 in→ width = 44064 cu in ÷ (1224 in × 0.009 in) = 4000 in
A circular fountain 10ft in diameter has a circular walk 3 feet wide paved around it what is the area of the walk?
Inner radius of walk = R1 = 10/2 ft = 5 ft. Outer radius of walk = R2 = 5ft + 3 ft = 8 ft Area of fountain = pi*R12 = 78.54 sq ft Area of fountain + walk = pi*R22 = 201.06 sq ft So area of path = 201.06 sq ft - 78.54 sq ft = 122.52 sq ft.
How long would it take to paint 2000 sq ft?
Time how long it takes to paint 10 sq ft. To paint 2000 sq ft would therefore take 200 times as long. With a roller on a prepared wall and a competent painter then 10 sq ft could be painted in less than 1 minute so 2000 sq ft would take 3 -4 hours.
How long does it take a ball going 60 MPH to travel 17 feet?
17 ft * (1 mi / 5280 ft) * (1 hour/60miles)
How long would it take to walk 174 ft?
40 seconds @ 3 miles/hour
How long does it take to drive from ft Meyers to ft lauderdale?
11/2hours
How long will take bud to walk to Grand Rapids?
well depends on where you start lake Odessa: 894,560 ft steps hastings: 805,234 ft steps ionia: 819,554 ft steps battlecreek/kalamazoo: 1,000,003 ft steps greenville: 56,934 ft steps Sunfield/woodland/clarksville,vermontville/portland: 799,879/809,212 ft steps
How many 4 inch bricks by 8 inch bricks are needed to build a walk 6 ft wide and 24 ft long?
648
How long would it tak to walk 4000 ft?
It will depent upon your walking Speed. Kunal Dhikle
How wide is 25.5 cu ft in inches?
Any value greater than 0 inches.(If the width were 0 in, then the volume would have to be 0 cu in.)Assuming a cuboid:volume = length × depth × width→ width = volume ÷ (length × depth)The width is dependent upon the length and depth (and volume).1 ft = 12 in→ 1 cu ft = 1 ft × 1 ft × 1 ft = 12 in × 12 in × 12 in = 1728 cu in→ 25.5 cu ft = 25.5 × 1728 cu in = 44064 cu inExamples:Let length = 1 in, depth = 1 in→ width = 44064 cu in ÷ (1 in × 1 in) = 44064 inLet length = 1224 in, depth = 9 in→ width = 44064 cu in ÷ (1224 in × 9 in) = 4 inLet length = 1224 in, depth = 0.009 in→ width = 44064 cu in ÷ (1224 in × 0.009 in) = 4000 in
A circular fountain 10ft in diameter has a circular walk 3 feet wide paved around it what is the area of the walk?
Inner radius of walk = R1 = 10/2 ft = 5 ft. Outer radius of walk = R2 = 5ft + 3 ft = 8 ft Area of fountain = pi*R12 = 78.54 sq ft Area of fountain + walk = pi*R22 = 201.06 sq ft So area of path = 201.06 sq ft - 78.54 sq ft = 122.52 sq ft.
How long does it take to build Beam bridge?
how long does it take to build a beam bridge of 2400 sq ft
What is the cost if a side walk is 4inches thick 3ft wide and 40 ft long if it costs 76.00?
76.00
How long does it take to get from Ft Lauderdale to Ocala?
Five hours.
How do you convert tile lineal ft into square ft?
How long does it take to answer. I was hoping for an example right away...
How long will it take to fly from Ft Lauderdale to Playa del Carmen?
a long time...
