2 inch long nipples is awesome. 2 inch diameter areola is gross.
Depends how long it is
The length of a single edge of an octagon can be calculated by measuring the diameter, then dividing this length by the square root of the sum of four and two times the square root of two, which would be written in a calculator as sqrt(4+(2*sqrt(2))). In this case, a five inch diameter equates to approximately 1.913 inches per side.
Approx 3.83 feet.
A caliber or caliper measurement is done on the width, not the length. 1 calber, then, would be one inch. So a 50-cal machine gun round (really 0.5 cal) is half an inch in diameter.
6
No problem in a hexagon, for example.
Is the hexagon within a 16 ft diameter circle (i.e., the points of the hexagon just barely touch the 16 ft circle)? Or, is the 16 ft circle entirely within the hexagon (i.e., within the flat sides)?
angles should be 60 degrees 360/6 degrees of circle divided by 6 sides length of timber should be the radius or half the diameter 7.5/2 = 3.75'
Divide the diameter by two - and you'll have your answer !
Area = 2.598 sq inches, approx.
96ft
A 44-inch diameter 500 cubic Imperial gallon cylindrical tank is 47.4 feet long.
It depends on how you use it.
six feet long
How many sides has a hexagon? What is the length of each side? Over to you....
Pinewood derby axles are one inch long, 0.087 inch diameter zinc plated steel nails.