The length of a single edge of an octagon can be calculated by measuring the diameter, then dividing this length by the square root of the sum of four and two times the square root of two, which would be written in a calculator as sqrt(4+(2*sqrt(2))). In this case, a five inch diameter equates to approximately 1.913 inches per side.
Approx 3.83 feet.
Each side of a regular hexagon is the same as its radius - in this case 31 inches.
2 inch long nipples is awesome. 2 inch diameter areola is gross.
It is an octagon each of whose sides is 5 cm long and each of whose interior angles measures 135 degrees.
Depends how long it is
The answer depends on whether the octagon is inside the circle or outside (tangential).
Approx 3.83 feet.
4.14 feet, approx.
There is insufficient information to answer the question. There is no indication that the octagon is regular and therefore, you may not assume that it is. Even it you were told that it is a regular octagon, there is still insufficient information: the answer will depend on what the 17.25 inch is a measure of - the diagonal of the octagon or its height (width).
Polygons do not have diameters. Is the 11.25" from one point to the opposite, or from one side straight across? The two are quite different and will give a different answer for the side length.
howlong,to the nearest inch, is each of the sides of an octagonal acre /
it mould be m2x5a=6m-4= 45 mc squared that's the answer
Each side of a regular hexagon is the same as its radius - in this case 31 inches.
Each side of the 48 inch perimeter is 6 inches long, therefore there are 48 / 6 = 8 of them. The figure is a regular octagon.
Divide the diameter by two - and you'll have your answer !
A 44-inch diameter 500 cubic Imperial gallon cylindrical tank is 47.4 feet long.
It depends on how you use it.