Study guides

☆☆

Q: How many 12 x 12 bricks for an 18 x 24 foot patio?

Write your answer...

Submit

Still have questions?

Continue Learning about Other Math

1 sq.ft. = 12 x 12 inches = 144 sq.inches 1 brick is 8 x 4 inches = 32 sq.inches 144 / 32 = 4.5 bricks (four-and-a-half bricks).

12 in*12 in = 1 sq foot. 10 ft * 10 ft = 100 sq feet so 100 tiles would be needed - assuming no wastage.

81 pavers (each 16 inches square) would be needed. 12 foot x 12 foot = 144 inches x 144 inches = 20,736 in2 16 inches x 16 inches = 256 in2 20,736/256 = 81

48 12"x12" tiles for a 7'x7' patio.

There are 12 inches to a foot. 12 inches =1 foot.

Related questions

144

12x13/12=13

needs more information to be accurately answered.

you would need 12...

A 12 x 12 inch brick is 1 square foot. A 20 x 20 (foot) patio is 400 square feet, so you would need 400 bricks.. this assumes you are butting the bricks fairly tight, not leaving large seperations between them, etc...

144

Is that 144 square feet, as in 12' x 12'?If that is the case, you would need a minimum of 81 bricks. If the patio is indeed square, or 12' by 12', each side is 144", or 9 16" bricks. 9 x 9 = 81 bricks.If the patio is not square, you may need extra bricks on one or both sides if the width is not evenly divisible by 16 inches.

81 bricks.12 feet times 12 inches per foot = 144 inches.144 inches divided by 16 inches per brick = 9 bricks in length/width.9 bricks (length) times 9 bricks (width) = 81 bricks.

12

12 x 8 = 96 !

Assuming the 12x12 bricks are 12 feet on each side, those are 144 square feet. The patio itself is 76 square feet. Unless you made a typo, not even one of those bricks is going to fit on the patio; you end up with about 0.5278 bricks.

A 12" x 12" brick covers an area of one square foot. Assuming your patio is 396 square feet, then you would need 396 bricks. However, you will almost certainly have to cut some bricks to fit them into whatever shape your approximately 20' x 20' patio will be, so you should figure on needing a few more. The rule of thumb is to order what you need plus 10% extra, but make sure you can return the unused bricks. Area covered by 12x12 inch brick is 144 square inches. That is 1 square foot. Total area of the patio is 396 square foot. Number of bricks required = 396/1 = 396 bricks. Source: www.icoachmath.com That gives you the extra ten percent you'll need to compensate for cutting, breakage, etc.

People also asked