Thirty two of them because 32 times 1/32nds = 1 inch
It is 1 + 1/10 inches: that is one inch and one additional mark provided those marks are said to be tenths. They may be eighths or sixteenths (or in very accurate rulers, 1/32nds).
There are one thousand thousandths of an inch in one inch.
One, if the unit is an inch!
There are eight eighths in one inch. Therefore, in half an inch, there would be four eighths.
If you mean thousandths then there are 1000 of them in an inch.
There are 32 32nds of an inch in one inch.
There are 32 32nds of an inch in one inch.
The closest you can get is 29/32nds of an inch. Which expressed as a decimal is 0.90625.
4/32nds of an inch
Minimum LEGAL tire tread depth is 2/32nds of an inch.
Tread is measured in 32nds of an inch, or x/32. Most off-road mud tires measure about 18/32, which is read as "eighteen thirty-seconds of an inch."
It is 1 + 1/10 inches: that is one inch and one additional mark provided those marks are said to be tenths. They may be eighths or sixteenths (or in very accurate rulers, 1/32nds).
12/32 = 3/8
Yes. Four 32nds (4/32) is the same as one 8th (1/8).
If 25.4 mm equal 1 inch, then 1 mm would be about 1/25 of an inch, correct? To put this in perspective to an inch, I'll use the smallest unit I know that is commonly used: 1/32. 32 (to an inch) divided by 25.4 is approximately 1.26/32 of an inch, or about 1 1/4 32nds of an inch.
There are one thousand thousandths of an inch in one inch.
One, if the unit is an inch!