0
To determine the number of 4x8 pavers in a square foot, you first need to calculate the area of one paver, which is 4x8 = 32 square inches. Since there are 144 square inches in a square foot, you divide 144 by 32 to get 4.5. Therefore, you can fit approximately 4.5 4x8 pavers in one square foot.
Add your answer:
Earn +20 pts
How many 4x8 pavers needed for 104 square feet?
324
How many 4x8 plywood is needed for 640 square feet?
20
What is 4x8 equals?
4x8=32
How many sheets of plywood do you need for a 127.6 sq ft room?
Standard plywood is 4x8. Meaning it will cover 32 square feet. So you will need four full sheets.
How many 4x8 sheets of plywood are needed to cover 20 sq mtr?
Each sheet = 4' x 8' = 32 square feet20 square meters = 215.278 square meters (rounded)20 sq mtr/32 sq ft = 6.727 sheets (rounded)
How many 4x8 pavers needed for 104 square feet?
324
How many 8x4in red bricks in 200 sqft?
1 square foot 12X12 = 144 square inches Brick 4x8= 32 square inches 200x144 divided by 32 = 900 Brick
How many 4x8 plywood is needed for 640 square feet?
20
How many 4x8 bricks cover 440 square feet?
1980
How many 4x8 bricks cover 36 square feet?
144
How many 4x8 feet pieces to cover a 30 foot circle?
A 30 foot circle covers about 707 square feet. 23 pieces would technically cover that. I'd get 30 of them so I wouldn't have to cut any of them.
How many sheets of drywall there are in 3000 square feets?
About 94 sheets if 4x8.
How many pieces of 4x8 plywood is needed for 640 square feet?
20
How many 4x8 inch bricks will you need for 256 square feet?
96
How many square feet in a 4x8 sheeet of plywood?
A 4x8 sheet of plywood covers 32 square feet. This is calculated by multiplying the length (4 feet) by the width (8 feet) of the sheet. Therefore, the total square footage of a 4x8 sheet of plywood is 32 square feet.
How many square feet in area 3 times 4x8?
The answer depends on the units used for 4x8 which are unspecified. The answer will vary according to whether those units are inches, metres, parsecs, etc.
How many 4X8 pavers in a 12' circle?
Assuming the circle has a diameter of 12', its area is pi*62 = 113.1 sq ft (approx). Four pavers of 4ft x 8 ft, each with an area of 32 sq ft will cover 128 sq ft in all. However, it will be necessary to use the offcuts.
