0
Area to be covered = 12ft * 14ft = 3657.6 mm * 4267.2 mm = 15,607,711 mm2
Area of each slab = 900mm * 600 mm = 540,000 mm2.
So, number of slabs required = 28.9 ie 29 slabs.
That is the mathematical answer. It assumes that almost all offcuts can be used up and that there are no breakages. In "real life" it is advisable to allow 5-10% for wastage.
What else can I help you with?
How many 450 mm x 450 mm patio slabs do you need in a 150sq ft area?
150 sq ft = 13.94 sq metres, approx. That area would require 68.8 or 69 slabs. However, this assumes that the area to be covered is "well-behaved" and that wastage is kept to a minimum.
How many slabs 450 x450 in a square meter?
Ah, what a lovely question! To find out how many 450x450 slabs are in a square meter, we need to do a little math dance. Since each slab covers an area of 0.45m x 0.45m, we can fit approximately 4 slabs (1/0.45) in one square meter. So, you can joyfully place 4 of these delightful slabs in a square meter of space. Happy painting!
How many block paving slabs do are need for eight square meters?
Depends on the linear dimensions of both the slabs and the ground.
How many 600mm x 300mm slabs do you need to cover 55 sq meters?
305.56
How many 600mm x 600mm slabs do you need to cover 55 sq meters?
Well, isn't that a happy little question! To cover 55 square meters with 600mm x 600mm slabs, you would need around 192 slabs. It's like painting a beautiful landscape - just measure twice and lay those slabs down gently, and you'll have a lovely space to enjoy!
How many 900mmx600mm slabs do you need for area 176m2?
If most of the off-cuts are also used then you will need 315 slabs. Otherwise you will need a lot more.
How many patio slabs to cover a area of 9 meters to 2 square meters?
The answer will depend on the size of the patio slabs.
How many square meters in 12ftx14ft?
12' x 14' is equal to: 15.61 square meters.
How many 450mm x 450mm garden slabs do you need for garden area of 21ft x 19ft?
The answer will vary slightly depending on assumptions: will the slabs have a space between them, and will you be cutting the slabs to fill fractions. 21 feet is equal to 14.2 of the 450 mm slabs. 19 feet is equal to 12.9 of the slabs. To complete the rectangular area, 14.2 x 12.9 = 183 slabs.
How many 600mmx600mm slabs do i req to cover an area of 450sq'?
20 I believe
How many patio slabs 44 cm by 44 cm would be need for area 10 feet by 13 feet?
You will need 63 44cm x 44cm slabs to cover that area.
How many 18inch x 18inch slabs to cover 15ft x 7ft area?
140
How many 600m x600m slabs will cover 12x24ft area?
First, convert the area of 12x24 feet to square meters: 12 feet is approximately 3.66 meters and 24 feet is about 7.32 meters, giving an area of about 26.8 square meters. The area of one 600m x 600m slab is 0.36 square meters. To find how many slabs are needed, divide the total area by the area of one slab: 26.8 ÷ 0.36 ≈ 74.4. Therefore, you would need 75 slabs to cover the area.
How many 450mm x450mm slabs in 30m2?
To determine how many 450mm x 450mm slabs are needed for a 30m² area, first convert the slab dimensions to square meters. Each slab is 0.45m x 0.45m, which equals 0.2025m². Next, divide the total area (30m²) by the area of one slab (0.2025m²): 30 ÷ 0.2025 ≈ 148.15. Therefore, you would need 149 slabs to cover the area, rounding up to the nearest whole slab.
How many 400mm x 400mm slabs to cover an area of 6ft x 8ft?
To determine how many 400mm x 400mm slabs are needed to cover an area of 6ft x 8ft, first convert the dimensions to millimeters: 6ft is approximately 1829mm and 8ft is about 2438mm. The area to be covered is 1829mm x 2438mm = 4,467,642mm². Each slab covers an area of 400mm x 400mm = 160,000mm². Dividing the total area by the area of one slab gives approximately 28 slabs needed (4,467,642mm² ÷ 160,000mm² ≈ 27.92).
How many slabs 18inc by 18inch slabs in 31ft by 9ft?
To find out how many 18-inch by 18-inch slabs fit into a 31-foot by 9-foot area, first convert the dimensions to inches. The area of the space is 31 ft × 12 in/ft = 372 inches and 9 ft × 12 in/ft = 108 inches, giving a total area of 372 inches × 108 inches = 40,176 square inches. The area of one slab is 18 inches × 18 inches = 324 square inches. Dividing the total area by the area of one slab, 40,176 ÷ 324, results in approximately 124 slabs.
How many 2ft slabs to cover an area of 4x4metres?
To determine how many 2ft slabs are needed to cover a 4x4 meter area, first convert the area into square feet. A 4x4 meter area is approximately 43.06 square feet (since 1 meter is about 3.28 feet). Each 2ft slab covers 4 square feet. Therefore, you would need about 11 slabs (43.06 ÷ 4 = 10.765), rounding up to ensure full coverage.
