0
What else can I help you with?
How many blocks would you need to build an up and down staircase with 5 steps up and 5 steps down?
15 blocks. The same steps can be used for going up or down!
How many blocks wouLd be needed for 50000 sq ft?
The only information you've given is that there is a surface with an area of 50,000 ft2. We need to know the size of the blocks to know how many are going to fit. If we assume for the blocks length L and width W, then all we can do for now is assume this formula: 50,000 ft2/L*W = number of the blocks needed
How many blocks with edges 1foot long would be needed to fill a cubical box with edges 1 yard long?
9 cause the volume is 9
How many city blocks would you have to walk back if you walked 9 blocks east then 10 blocks north and then finished by walking 4 blocks west?
You would have to walk 10 blocks south and then 5 blocks west or something like that for example 3 blocks west then 5 blocks south then 2 blocks west then 5 blocks south again but it all adds up to be a total of 15 blocks.
How many city blocks would you have to walk back if you walked 7 blocks east then 10 blocks north then finishing by walking 8 blocks west?
To complete the circle you would have to walk 10 blocks south and 1 block east to return to your starting point, 11 blocks.
How many blocks would you need to build an up and down staircase with 5 steps up and 5 steps down?
15 blocks. The same steps can be used for going up or down!
How many blocks that are 16 inches by 16 inches would be needed to fill 450 sq feet?
253.125 blocks.
Did the HMHS Britannic have a staircase?
It did have a staircase and there was a dome as well. When the Britannic was sinking the water would be rising up the staircase and when the ship rolled over the dome would of imploded.
Would a spiral staircase have a greater mechanical advantage than a steep straight staircase explain?
A spiral staircase does not provide a greater mechanical advantage than a steep straight staircase; in fact, it typically requires more effort to ascend. This is because a spiral staircase often has a tighter radius and requires a greater vertical distance to be covered for each step, leading to increased exertion. While spiral staircases can save space and add aesthetic value, they do not reduce the effort needed to rise vertically compared to a straight staircase.
How many 1 ft blocks is needed for a 12 by 20 surface?
When you say 1 foot block, are they square blocks with side equal to 1 foot, in that case you would need 240 blocks
What is faster a 1982 covette with two blocks or a ferrari enzo?
The modifications needed to make a 1982 'vette as fast as an Enzo would go beyond a couple of 'blocks', unfortunately.
How many blocks wouLd be needed for 50000 sq ft?
The only information you've given is that there is a surface with an area of 50,000 ft2. We need to know the size of the blocks to know how many are going to fit. If we assume for the blocks length L and width W, then all we can do for now is assume this formula: 50,000 ft2/L*W = number of the blocks needed
How many blocks that are 1 foot long on each edge would be needed to fill a cubical box with edges 1 yard long?
one square yard would take 9 blocks and one cubic yard would take 27 blocks, that is if the question is written correctly
What is the least number of place-value blocks you need to show 4200 The greatest?
To represent the number 4200 using place-value blocks, you would need 4 thousands blocks (for the 4000), 2 hundreds blocks (for the 200), and no tens or ones blocks. Therefore, the least number of place-value blocks needed is 6. This includes 4 blocks for the thousands and 2 blocks for the hundreds.
How much sand for 100 blocks?
The amount of sand needed for 100 blocks depends on the size and type of the blocks being used. For example, if you're referring to standard concrete blocks, approximately 0.5 cubic yards of sand may be needed for each block. Therefore, for 100 blocks, you would need around 50 cubic yards of sand. Always check the specific requirements based on the block dimensions and the intended use.
How many 50kgs of cement is needed to lay 100 blocks?
The amount of cement needed to lay 100 blocks depends on the size of the blocks and the mortar mix used. Generally, for standard concrete blocks, approximately 1 bag (50 kg) of cement can lay about 40 to 50 blocks, depending on the mortar thickness and mix ratio. Therefore, you would need about 2 to 3 bags of 50 kg cement to lay 100 blocks. Always consult specific project guidelines for more accurate estimates.
How much power is generated by the staircase in one step?
The amount of power generated by a person stepping on a staircase is very small, usually in the milliwatt range. This is because the energy generated from one step is insufficient to produce a significant amount of power. Multiple steps or users would be needed to generate more usable power.
