First, convert everything to the same units: four inches = 1/3 feet. So, the volume is 10 x 10 x 1/3 = 331/3 cubic feet. There are 27 (33) cubic feet in a cubic yard, so you would need 331/3 / 27 = 1.235 cubic yards (to three decimal places)
30 inches by 10 feet = 25 square feet.
Ah, what a lovely question! For a 10x10 area, you would need 100 square feet of blocks. Since each block is 10 square feet, you would need 10 blocks to cover that area. Just imagine those blocks creating a beautiful foundation for your creativity to flourish.
1 yard = 3 feet so 10 yards = 30 feet. Simple!
on a wall it would be 100 square feet.
There are 10 concrete block per m2.
10 feet.
volume of wall = 10 * 10 *12*12 and volume of blocks = 8 * 16 no.of block =14400/128=112.5 112 blocks
16.05
A concrete block is 18 inches long and 8 inches high. Therefore, about 6 block for each side = 9 feet 6 inches, with the end block of the next side turned sideways. 4 sides X 6 block is 24 block per course and where I live I would need at least 6 coarses below grade for a total of 144. I would get 10% extra just in case which would make it 158. You would have to add to this for any height above grade.
87.5 cubic feet
form_title=Concrete Pumping form_header=7713 "How many feet, from the street,will the concrete be pumped?"*= () Less than 10 feet () 10 - 50 feet () 51 to 100 feet () More than 100 feet Is a boom truck necessary to move the concrete to the pour location?*= () Yes () No () Don't Know How would you best describe the nature of the project?*= () Footing/Foundation () Steps () Flat slab () Interior floor () Other
It weighs 59 lbs. There is a difference between a "real" cinder block and a concrete block. A cinder block uses cinders--ash from the burning of coal--as its aggregate. Concrete blocks are made from concrete. Concrete block is far stronger than is cinder block, and some jurisdictions prohibit the use of cinder block. The only justification for cinder block is that it weighs less than concrete block, which is important if the ground you're building on isn't strong enough to support a heavy structure. This justification has gone away, because now you can buy concrete block made from expanded-shale aggregate that's as light as cinder block and as strong as standard-weight concrete masonry.
There are 3 feet in a yard, so therefore 10 ft x 10 ft is 3.33 yd x 3.33 yd.
65 feet * 10 feet * 1 foot : volume = 65 * 10 * 1 = 650 cubic feet or 18.41 cubic metres
A typical cement truck can hold between 10 to 12 cubic yards of concrete, which is equivalent to around 270 to 324 cubic feet.
50 feet square on 10 feet of concrete 13 feet down.