1 mm = 4/100 inches
Probably 19 gauge, which is 1.067 mm
1 mm = 4/100 inches
The nearest is 18 gauge, which is 1.02 mms
12 gauge is thicker than 14 gauge.
1/2 inch is 12.7mm
The gauge system varies depending on the type of measurement being referenced, such as wire gauge or sheet metal gauge. For example, in the American Wire Gauge (AWG) system, 1 mm is approximately equivalent to 18 gauge. In sheet metal, 1 mm is roughly equivalent to 18 or 20 gauge, depending on the material. Always check specific gauge charts for precise conversions.
19 gauge steel is 1.11 mm thick and 20 gauge is .953 mm thick.
For wire gauge, 1.25 mm diameter wire is closest to 16 gauge (AWG). See related link.
2.5mm=.098 of an inch or 63/640 ( that is a fraction) Direct Conversion Formula 2.5 mm* 1 in 25.4 mm = 0.09842519685 in
Indian Railways uses four gauges: 1. 1,676 mm (5 ft 6 in) Broad Gauge (BG), which is also called Indian gauge, 2. 1,000 mm (3 ft 3 3⁄8 in) metre gauge (MG), 3. 762 mm (2 ft 6 in) Narrow Gauge (NG), and 4. 610 mm (2 ft) Narrow Gauge. Source: - TravelKhana.com
.953 mm (USG)
10 gauge: 3.57 mm11 gauge: 3.18 mm