There are 100 cm in a meter, so the wall is 400 cm X 1200 cm. If there is no gap between the tiles: then 400 cm / 4 cm = 100 tiles, and 1200 cm / 4 cm = 300 tiles. So 100 x 300 = 30,000 tiles.
8 of them.
The area of a rectangle is length X breadth, so here, 16 X 18 = 288 square feet. Since each tile is 1 foot square, so has an area of 1 square foot, Josh needs 288 tiles.
Lets do length and width in terms of tiles. The length is 6m/0.2m/tile 30 tiles and the width is 5m/0.2m/tile 25 tiles. Then the area is l X w 30 tiles X 25 tiles 750 square tiles. Since each tile is square, 750 tiles.
* Calculate how many tiles you need to place for the required width. (Divide width of sideway by width of tile; round up if necessary.)* Calculate how many tiles you need to place for the required length. (Divide length of sideway by length of tile; round up if necessary.) * Multiply the number of tiles long, times the number of tiles wide. This gives you the number of required tiles. (Some additional adjustments may be required; not relevant for this problem.) Divide that by the number of tiles per box, to get the required number of boxes.
If the carpet tiles you are using are the standard 12" square, then multiple your length and width to get the square footage. In this case your room would need a minimum of 196 tiles. CHeck the box for pattern repeat and remember to add tiles for damage and waste.
They are tiles whose length is the same as their breadth.
49 tiles because a square has the same length as it does breadth. The Area of a square is length times breadth, so if length eqauls seven then so does the breadth which means that the area will be 7x7 which eqauls 49.
8 of them.
888.88
(100*144)/(12*5) = 240 tiles are needed
Please mention the length and width of the room to get 41 sq.feet.after that we can calculate the number of tiles required.
The area of a rectangle is length X breadth, so here, 16 X 18 = 288 square feet. Since each tile is 1 foot square, so has an area of 1 square foot, Josh needs 288 tiles.
49 tiles
first give the unit of tiles dimensions as 16 inch or meter or feet or what, if it is not in feet as is look from above question then change the dimension in feet then multiply the length and breadth of the side of tiles (after changing the unit in feet) and then divide 100 by the outcome of multiplication of lenght and breadth of tile.
81 tiles squared because if it's a square then it would be 9x9 which is 81
Lets do length and width in terms of tiles. The length is 6m/0.2m/tile 30 tiles and the width is 5m/0.2m/tile 25 tiles. Then the area is l X w 30 tiles X 25 tiles 750 square tiles. Since each tile is square, 750 tiles.
64 nos tiles is required calculation is