Best Answer

Lets do length and width in terms of tiles. The length is 6m/0.2m/tile 30 tiles and the width is 5m/0.2m/tile 25 tiles. Then the area is l X w 30 tiles X 25 tiles 750 square tiles. Since each tile is square, 750 tiles.

Q: How many square vinyl tiles 20 cm on a side are needed to cover a floor 6m by 5m?

Write your answer...

Submit

Still have questions?

Continue Learning about Other Math

20 tiles.

You would need 25 (5x5).

that question depends on how big your tiles are and how big your floor is

Tiles are the "square things". Altogether, the tiles make up the floor.

it would be 81 tiles

Related questions

The answer will depend on the size of the tiles.

The amount of tiles needed to cover a floor will depend on the size of the floor.

240 square tiles are needed

6' x 9' (54 square feet) = 6 square yards of tiles needed.

The number of tiles needed to cover the floor is a function of the size of the tiles

It should take about 825 1 foot square tiles to cover a floor with those dimensions. This assumes roughly a 10% waste factor.

64

640

you need to know how wide the floor is in addition to how long. Number of tiles is lenght x width

The number of 13 inch tiles needed will depend on the actual dimensions of the floor rather than the square footage. If the room is square, 169 tiles, with 1/16 inch or larger grouted seams, will completely cover it. If the floor is rectangular, additional tiles will be needed, the exact number depending on how many tiles must be cut. As a general rule, approximately 10 percent extra is usually sufficient to cover waste from cutting and accidental breakage.

How many 24x24 tiles it take to cover a 14×14 room

49 tiles