If it's full of water, then the water in it weighs about 106.5 pounds. I have
no way of knowing what the empty hose weighs by itself. Whatever it is,
you'll need to add that to 106.5 pounds.
That section of hose holds 25.5 gallons of water when it's full, which weighs about 213 pounds. To that, add the weight of the empty hose, which I don't know.
Weight of 50ft section of 3 inch hose with water in it?
109 lbs with no water
There need not be any water at all in the hose! The capacity of the hose is 3.41 cubic feet.
A water hose is a cylinder, and since the volume of a cylinder is pi*r^2*height, we can calculate the volume of the water hose by finding the radius and height. A 3 inch hose has a radius of 1.5 inches, and 50 ft is equal to 600 inches, so 1.5^2 is 2.25, and 2.25*600 is 1,350. Finally we multiply by Pi to get approximately 4,239 cubic inches. Since 1 cubic inch is equal to 0.00432 gallons, there are 18.3506 gallons.
That section of hose holds 25.5 gallons of water when it's full, which weighs about 213 pounds. To that, add the weight of the empty hose, which I don't know.
It is an accepted fire service understanding that 5" Large Diameter Hose (LDH) will hold 1 gallon/ft. On average a 100' section of 5" empty weighs 110 lbs. With water weighing 8.33 lbs/gal. a 100' section of LDH filled with water will weigh approximately 944 lbs.
Weight of 50ft section of 3 inch hose with water in it?
Fire hose reels are much stronger than typical home-based hose reels people use to water their gardens and lawns. Typical heavy duty fire hose reels weigh anywhere from 25 to 35 pounds. In kilograms, the weight of typical reels are 11-15 kg.
109 lbs with no water
Depends on the hose, obviously different hoses weight different amounts.
A fire hose is used to stop a fire by its ability to transfer water. The hose will deliver water from a source through a nozzle and onto the flames. We typically find a hose connected to a pump, which provides water under pressure. The hose will deliver that pressurized water to the nozzle, and a firefighter can direct the stream as needed.
50 feet
A garden hose as a means to get water, yes. A fire hose, no.
when there is a fire the fire engine pulls up and hopefully connects a hose to a fire hydrant and that brings water into the engine. The fire engine then pumps the water from the hydrant to the engine and finally to the hoses and they help pump water up to the hose to stop a fire.
There are many different types of fire hoses, but the type you're probably picturing is called an "attack hose" that's the hose that takes water from the pumping system to the nozzle. It's the business end of the operation. The typical attack hose is 1530 cm long and has an inner diameter of as much as 7.6 cm. The volume of a hose is the length of the hose, times the area of its circular cross-section. With an inner diameter of 7.6 cm, an attack hose has a cross-section of πr2=3.14*3.8^2= 45.34 square cm. So, the volume of water in a full attack hose is 1530*45.34= 69370.2 cubic cm. That's about 18.32 gallons.
when there is a fire the fire engine pulls up and hopefully connects a hose to a fire hydrant and that brings water into the engine. The fire engine then pumps the water from the hydrant to the engine and finally to the hoses and they help pump water up to the hose to stop a fire.