0
What else can I help you with?
How could you find out the volume of metal in a teaspoon?
Fill a graduated container with enough water to completely submerge the spoon.Record the water level.Submerge the spoon in the water.Record the water level again.Subtract the 1st water level from the 2nd water level; the difference is the volume of the spoon.
What would you use to find the capacity of a teapot?
One way to find the capacity of a teapot is to completely fill the teapot with water. Then, find the largest measuring cup you have. If the largest you have is a one cup measurer, then start filling up that cup and pooring out the water from the teapot into the cup. Once the cup is full, empty the water down the drain and keep a running tally of how many cups you are filling. Once you get to the end you will eventually have water that will not fill the cup completely. At this point you must use another measuring device, like a tablespoon and measure how many of those are remaining. You may have to estimate the last few drops of water.
Can you get exactly 1 liter if you have an 8 liter jug and a 15 liter jug a tap and no other container?
Yes... First fill the 8 litre jug completely from the tap and then pour the contents into the 15 litre jug. Next fill the 8 litre jug completely from the tap and pour the contents into the 15 litre jug until it is full and you will be left with exactly 1 litre of water in the 8 litre jug.
How much sand to fill a 16 foot circle 2 inches deep?
33.5 cubic feet.
The number of cubes inside of a container to fill it up is called?
This is not well-worded. The smaller the cubes the more you'd need to fill a container, and the more completely they'd fill it. One large cube would not fill a round container but there might not be room for more than one.
How much water does it take to completely fill a pool that is 50 meters long 25 meters wide and 2 meters deep?
It would take 2500 m^3 (2500 cubic meters) of water. This is equal to 2,500,000 liters or about 660,430 US gallons.
How much water is needed to fill a pond 5m deep?
More information is needed in order to answer this question. The size of the pond, preferably in square meters.
Can you fill a deep fryer with water and use it to boil?
No, you should not use water in a deep fryer.
How long does it take for a hot water heater to fill up completely?
The time it takes for a hot water heater to fill up completely can vary depending on the size of the tank and the water pressure. On average, it can take anywhere from 30 minutes to an hour for a hot water heater to fill up completely.
How many liters of water to fill your pool 7 meters by 3 meters by 2 meters?
42,000
How many liters of water to fill your pool 8 meters by 4 meters by 2 meters?
1000litres
How much water to fill a 21' round pool?
If you fill it to four feet deep, the total is 10,408 gallons of water.
I have 645 gallons of water how many 21 gallon containers can i fill?
645divided by 21 equals 30.714. Hence, you can fill completely 30 such containers and 71.4% of the 31st container will be filled with water. Answer two If fill means completely fill, than you can fill 30 containers.
What can 1000000 drops of water fill?
A quick visual of this volume would be an Olympic size pool filled approximately 2 feet deep with water.Dimensions are listed below:50 meters = 164.041995 feet (a)25 meters = 82.0209975 feet (b)2 feet deep (c)Approx = 250,000U.S. gallons
How many liters would it take to fill an 8 meter by 4 meter pool that is 2 meters deep?
It would take 64 m3 of water, which is 64000 liters or about 16,907 gallons.
How many gallons of water does it take to fill 18x36 pool?
That will depend on how deep you want the water to be.
13300 gallons of water can fill?
13300 gal of water can fill WHAT? 13,300 gallons of water will fill a 14'x28' pool that's 3 1/2' to 8 1/2' deep.
