If a sari uses 3.58 meters of material and the material costs 6.98 per meter you calculate the cost:
3.58 meters x 6.98 per meter = 24.9884
24.9884 or if rounded to whole pennies 24.99Using: 1 meter = 3.28084 feet1 square meter = (3.28084)2 square feet450 square meters = 4,843.76 square feet (rounded)
100 cubic metres - without using a calculator !
A square meter is a unit of area, not volume, so it doesn't directly convert to gallons. Gallons are a unit of volume, typically used to measure liquids. To convert square meters to gallons, you would need to know the depth or height of the area in meters and then calculate the volume in cubic meters. Once you have the volume in cubic meters, you can convert that to gallons using the conversion factor that 1 cubic meter is approximately equal to 264.172 gallons.
( 1 ) divided by (the capacity, in cubic meters, of the wheelbarrow you're using)
Oh, dude, you're hitting me with some math here! So, the circumference of a circle is calculated using the formula C = 2πr, where r is the radius. Since the circle is 1 meter round, the radius is 0.5 meters. Plugging that into the formula, you get C = 2π(0.5) = π meters, or about 3.14 meters. So, like, the circumference of a 1 meter round circle is approximately 3.14 meters.
it can be measured in meters (m) using a ruler
1 km = 1000 meters 1 meter = 0.001 km
Meters cubed, or cubic meter, is a measure of volume, a.k.a. capacity.
Indirect material is normal fixed cost that is why it is allocated using some kind of ratio or formula.
Using 3.28084 feet = 1 meter, 151 feet = 46.025 meters (rounded)
Using the conversion factor of 1 meter = 3.28 feet: 60.09 meters x 3.28 feet per 1 meter = 197.0952 feet.
Using: 1 meter = 3.28084 feet1 square meter = (3.28084)2 square feet450 square meters = 4,843.76 square feet (rounded)
385 £ or $ whatever currency you are using
The least count of a meter rod is typically 1 millimeter (mm), which is equivalent to 0.001 meters. This means the smallest measurement that can be accurately read using a standard meter rod is 0.001 meters. However, some meter rods may have finer divisions, allowing for more precise measurements.
To find the base meter of a rectangular area with an area of 5015 square meters, you need to know the other dimension (length or width). If you provide this additional information, we can calculate the base meter using the formula: base meter = area / other dimension.
100 cubic metres - without using a calculator !
1 meter = 100 centimeters 4.58 meters x 100 centimeters/meter = 458 centimeters you may try using the online converter linked below next time