No, 0.10 is not greater than 0.14. When comparing decimals, you look at the place value of each digit starting from the left. In this case, the tenths place value is the first decimal place. Since 0.14 has a larger value in the tenths place than 0.10, it is greater.
001, 002, 003, 004, 005, 010, 011, 012, 013, 014, 015, 020, 021, 022 and 023.
0.011 is larger than 0.010
greater than
greater than
7.5 is greater than 7.05 is.
The thickness of a business card. .010"-.014" of an inch.
.014 is higher than .01
The gap should be between .006 and .010 if it has aluminum clylinders. The gap should be between .010 and .014 if it has cast iron cylinders.
50
.010 is thicker than .005
001, 002, 003, 004, 005, 010, 011, 012, 013, 014, 015, 020, 021, 022 and 023.
Yes.
0.011 is larger than 0.010
0.010 is 0.007 thicker than 0.003
1800 014 014
r-014 is slowpoke
The coil has two bolts to hold it in position. Loosen both bolts, place a .010 - .014 feeler gauge (or business card) between the coil and flywheel, and tighten bolts. The size of the gap determines the timing of the engine.