0
What else can I help you with?
What amperage is 14 2 wire rated at?
Even assuming you mean 14 swg (or awg) wire, the safe working current, and the fuzing current would have different values. And assuming further that it is copper wire to which you refer.
72 in piece of wire that you will cut into pieces and form the frame of a cube What is the volume of the cube that you can make with this wire?
6 in x 6 in x 6 in = 216 cubic inches
A copper wire is to have a length of 16 cm with a tolerence of 0.02 cm how much must be trimmed from a wire that is 18 cm long for it to meet the specifications?
at least 1.98 cm and no more than 2.02 cm
Suppose that 13 inches of wire costs 39 cents. At the same rate how many inches of wire can be bought for 24 cents?
Each inch of wire cost 3 cents and so 24/3 = 8 inches of wire
Joel has a 50 meter roll of copper wire that weighs 7.5 kilograms how many meters of wire will be in a new shipment that weighs 502.5 kilograms?
Number of rolls in the new shipment = 502.5/7.5Length of the new shipment = 50 x (502.5/7.5) = 3,350 meters
Can copper and alluminium wire of same length and diameter have same resistance?
No, copper and aluminum wire of the same length and diameter will not have the same resistance. Copper has a lower resistivity than aluminum, so a copper wire will have lower resistance compared to an aluminum wire of the same length and diameter.
What are the three factors that would give a piece of copper wire high resistance?
High resistance in a copper wire can be caused by factors like a longer wire length, a thinner wire diameter, and the material's high temperature, which increases resistance due to increased collisions among electrons.
Would have the same resistance as a copper wire that is 4 m long and has a cross-sectional area of 0.066 cm2?
A wire with the same resistance as the given copper wire would have the same resistivity as copper. The resistance of a wire is dependent on its resistivity, length, and cross-sectional area. To calculate the resistance of a wire, use the formula R = (resistivity * length) / area; however, without the specific resistivity value, an exact value cannot be provided.
A piece of copper wire was cut into n equal parts these parts are connected in parallel how will the resistance of the parallel combination compare with the resistance of the wire?
The resulting resistance of the parallel combination will be the resistance of the original wire divided by n squared.
What would reduce resistance in a copper wire?
Reducing the temperature of the wire will decrease its resistance. Also, using a wire with a larger cross-sectional area will lower resistance since there is more room for electrons to flow. Finally, using a more conductive material than copper, such as silver, can reduce resistance.
What is the resistance of a 6 000 foot piece of 1 0 copper wire?
The answer depends on the cross sectional area of the wire. This is not given.
What copper wire would have the highest resistance?
A thicker copper wire will have higher resistance as it will offer more opposition to the flow of electrons compared to a thinner wire. Additionally, a longer copper wire will have higher resistance compared to a shorter wire due to increased distance for the electrons to travel. Finally, a copper wire with impurities or defects will have higher resistance than a pure copper wire.
Which material has a greater resistance aluminum or copper wire?
Copper wire has greater resistance than aluminum wire. This is because copper is a better conductor of electricity than aluminum. This means that copper wire will have less resistance and will be able to carry more current with less energy loss.
Does long wire have a lower or higher resistance than short wire?
A long piece of wire will have more resistance in it than a shorter one of the same material.
A piece of wire 100 m long has a diameter of 1 mm with a resistance of 2 ohms calculate the resistance of the same wire 2 km long with the same current?
If the wire length is 100m and the Diameter is 1mm calculate the Resistance of wire?
What is the resistance value of 1 meter copper wire?
The resistance value of a 1 meter copper wire depends on its gauge (thickness) and temperature. For example, a 1 meter wire of 24-gauge copper has a resistance of about 25.67 ohms at room temperature. It is important to consider these factors when calculating the resistance of copper wire.
What has the lowest resistance copper wire or iron wire?
Copper wire has lower resistance compared to iron wire. This is because copper is a better conductor of electricity due to its higher electrical conductivity and lower resistivity.
