3 3/7 minutes
You need to convert the minutes and seconds, to minutes. Then you can divide the 165 copies by the number of minutes.
20 hours and 50 mins
275/33 x 21 = 175 Therefore, 175 balls would be produced at the same rate in 21 minutes as there would be in 33 minutes.
207/36 = 5.75 minutes = 5minutes 45seconds
This is called the duty cycle. A machine with a 60 o/o duty cycle can weld continuously for 6 minutes out of 10.
24 minutes
1 mile = 1600 meters. Check www.concept2.com to see the online rankings to compare times of different rowers over this distance on a rowing machine.
Around 150 calories on average. Varies with different body weights.
if it is a regular washing machine it should take at least 30 minutes
HDepending on the type of washing machine you might have,you can use cleaning liquids and solutions which you pour in the machine and run it for few minutes. You can also clean it with a piece of cloth.
more data needed in how slow it works
Instructors usually work with their clients on the machines for 20-45 minutes. During this time, they are observing and giving feedback about alignment, breathing, and precision of movement
The duty cycle of the welding machine indicates the time the machine can be energised before it must rest. Given in relation to a 10 minute time span, a machine with 100 per cent duty cycle can weld continuously for10 minutes, while machines with 50 per cent can only weld for 5 minutes. Typically when welding by hand it is not necessary to weld continuously for long periods before letting off of the trigger which gives the machine its rest. When the machine is set up for welding long beads, such as with a track system, then it is important to have the 100 per cent duty cycle. Otherwise the machine will kick off before a weld is completed.
You should do at least two miles on the elliptical machine every day.
One of the most popular of the coffee brand machines today is the Keurig. It has taken the coffee industry to a different level. It offers individual, fresh brewed cups of coffee in less then 3 minutes. Coffee is packaged in individual serving size.
To use the Fairy Floss machine set it up and plug it in. Place the sugar in the machine, turn the machine on and set it to medium. Let it heat up for approximately four minutes. Place your stick into the machine, keep twirling the stick and moving it in a counter clockwise direction until it is filled with cotton candy.
Laminating machines are often seen in schools and offices. Oftentimes, people are intimidated and do not dare to use it. Generally, a laminating machine will coat a plastic film to cardboards or pieces of paper, in order to make them last longer and prevent tearing. If you have seen a laminating machine and need to operate it, do not fear, because it is not that difficult to use. To give you an idea, here are some tips for operating a laminating machine. • Switch the laminating machine on. Usually, the switch is located at the back portion of the machine. Once on, you have to wait for a few minutes, depending on your machine’s model, for the machine to heat up. Typically, laminating machines require a minimum of 10 minutes to warm up. If you want to know if your machine is ready, simply check the indicator light. • Choose the speed of the laminating machine. Laminating machines differ in their speed. Usually, the speeds would be from one to 10, with one being the slowest. For thick items that need to be laminated, you have to choose slower speeds, while thinner items can be laminated much more quickly. • Insert the items that you want to be laminated into the laminating machine. You need to slide the items up until they touch the edges of the plastic laminating film. Ensure that the items are not overlapping or too wide for the machine to laminate. • Press the button to start laminating. Once you have pressed the run button, the items will move and the lamination process will begin. In case you want to add additional items, a stop button can be pressed any time. Laminating items is very simple with a laminating machine. You do not need to have technical skills to be able to operate one. In case you want to change the film in the laminating machine, be sure to change it when the rollers are cold in order to prevent any accidents.