answersLogoWhite

0

millimeter-mm centimeter-cm kilometer-km SO MILLIMETER

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

Scale diameter when the sun is 3000 mm. of the planet Saturn?

If the scale Merriam of the Sun is 3000 mm, then the scale diameter of Saturn would be 274.2 mm.


What is the scale diameter of Jupiter when the sun is 3000 mm?

The scale diameter of Jupiter would be approximately 31.8 mm if the sun is represented as 3000 mm in diameter on the same scale.


What scale on the micrometer is used to measure to 0.0001?

To measure to 0.0001 mm (or 0.1 micrometers), a micrometer with a vernier scale is typically used. This type of micrometer has a main scale and a sliding scale that allows for precise readings, often featuring a total of 50 divisions on the vernier that correspond to 1 mm on the main scale. Each division on the vernier scale represents 0.02 mm, enabling measurements to the nearest 0.0001 mm.


Is the scale for a scale drawing is 8 millimeters 1 centimeter. which is larger the actual object or the scale drawing?

To simplify a scale, convert to the same units, drop the units and divide by their highest common factor: 1 cm = 10 mm drawing : object = 8 mm : 1 cm → 8 mm : 1 × 10 mm → 8 mm : 10 mm → 8 : 10 → 4 : 5 → object is larger than scale drawing.


What is LC of vernier Calipers?

The least count (LC) of vernier calipers is the smallest measurement that can be accurately read using the instrument. It is determined by the difference between one main scale division and one vernier scale division. For a typical vernier caliper with a main scale division of 1 mm and a vernier scale that has 10 divisions corresponding to 9 mm on the main scale, the least count would be 0.1 mm (1 mm - 0.9 mm). This means that measurements can be taken with a precision of 0.1 mm.


What are the smallest divisions on the main scale and the vernier scale of the vernier calipers?

The smallest division on the main scale of vernier calipers is typically 1 millimeter (mm). On the vernier scale, the smallest division is usually 0.02 mm or 0.01 mm, depending on the precision of the caliper. This allows for measurements to be read with greater accuracy, often up to 0.01 mm.


What is 52 inches in 4 mm scale?

If 1 inch = 4 mm. Then 52 inches will be 208 mm.


What is a scale used for in science?

mm ((milimetres))


What is the smallest main scale division in a vernier scale with 25 divisions?

In a vernier scale with 25 divisions, the smallest main scale division is typically determined by the relationship between the main scale and the vernier scale. If the vernier scale is designed to provide a finer measurement, it often allows for a reading that is a fraction of the main scale division. For example, if the main scale has divisions of 1 mm, the smallest division on the vernier scale would allow for readings accurate to 0.04 mm (1 mm / 25), giving a finer resolution than the main scale alone.


If the sun has a diameter of 3000 mm what is the scale diameter of Venus?

Venus has a diameter of about 12,104 km, whereas the sun has a diameter of about 1,391,000 km. If the sun's diameter is 3000 mm at some scale, then the scale diameter of Venus would be about 12.32 mm.


What is 98 mm equals cm mm mean?

It might mean "9 cm 8 mm"


What scale would 4.88 mm equals?

Half the width of your finger.