356
Yes, it is possible.
A whole number is a pure number: it is not a measure of length. For example, an object which is a whole number of millimetres in length will mostly not be a whole number of inches.
Cubic inches are all three of those multiplied together. The length, width and height are all measured in inches... not cubic inches, and not square inches.... just inches. If you multiply the length by the width you get the area - a number of square inches. When you multiply the area by the height you get the volume - a number of cubic inches If you have been asked to work out the length, width and height from a number of cubic inches, then you have probably been given a cubed number.... the first ten cubes are # .....1 # .....8 # ...27 # ...64 # ..125 # ..216 # ..343 # ..512 # ..729 # 1000 If you have been asked to work out any other number then either you need to get a calculator and work out the cube root, or you have to use some clues that you have been given in the question.
There is not enough information to give an answer.
1. Multiply the length in inches times the width in inches, which will give you the number of cubic inches in the room. 2. Divide that anser by 144, which will give you the number of square feet in the room. 3. Example: room is 36 inches long and 24 inches wide. Multiply 36X24 = 864 cubic inches. 864 divided by 144 = 6 cubic feet.
To find the number of square inches on a piece of paper multiply the width by the length. So to answer this question multiply 8.5 by 11. The answer is 93.5 square inches.
The number of feet is not the same as the number of inches. In length, inches = feet * 12
A whole number is a pure number: it is not a measure of length. For example, an object which is a whole number of millimetres in length will mostly not be a whole number of inches.
9.5 inches
As there are 12 inches in 1 foot, divide the length in inches by 12 to give a whole number quotient and remainder; the quotient is the number of feet and the remainder is the number of inches. eg if the couch was 80 inches long, then: 80 ÷ 12 = 6 r 8 (since 6 × 12 + 8 = 72 + 8 = 80) → 80 inches = 6 ft 8 in.
You can divide the number of inches by 12, (the number of inches in a foot) to come up with a board length measurement.
The length of each side is (115 inches)/(the number of sides in the polygon) .
7423 inches, unless its winter. then it is extended by about 18 inches.
Divide the number of inches by 12, which is the number of inches in one foot of length. For example; 144 inches are equal to 12 feet.
36
The perimeter actually doesn't tell you anything about the breakdown betweenthe length and width. All we can tell about this one is that the sum of (length+width)has to be 98 inches. That still leaves an infinite number of possible rectangles.If the perimeter is 196 inches and the length has to be the longer dimension, thenit can be anything more than 49 inches, with no upper limit.For example:Width = 1 millionth of an inchLength = 1 millionth of an inch less than 98 inchesPerimeter = 196 inches.
0.23 is a number, and doesn't have a length.
The perimeter actually doesn't tell you anything about the breakdown betweenthe length and width. All we can tell about this one is that the sum of (length+width)has to be 15 inches. That still leaves an infinite number of possible rectangles.If the perimeter is 30 inches and the length has to be the longer dimension, thenit can be anything more than 7.5 inches, with no upper limit.For example:Width = 1 millionth of an inchLength = 1 millionth of an inch less than 15 inchesPerimeter = 30 inches.