15 revolution per second 900/60=15 60 seconds in a minute divide by 60 to get number of revolution per second
At 6:30, the hour hand is at 195 degrees, the minute hand is at 180 degrees, the second hand would be at 0 degrees. The hour and minute hands would also be 15 degrees apart.
It moves 0.1 degrees per second. There are 360 degrees in a full circle - so, every minute that passes, the hand moves six degrees. Thus, every second, the hand moves one tenth of a degree (6 degrees divided by 60).
It doesn't matter where it is on the clock. If the clock is working properly, the speed of the hand is constant.The hand's angular speed is 360 degrees per minute = 6 degrees per second.For the linear speed, the tip of the second-hand revolves in a circle whose circumference is(2 pi) times (length of the hand) = 4 pi centimeters.It revolves once per minute. So the speed of the tip is (4 pi) cm/minute, or (240 pi) cm/hour.In numbers, the speed at the tip is:12.6 cm/minute2.09 mm/sec7.54 meters/hour0.000469 mile/hour593.7 feet/day12.593 furlongs/fortnight.Notice that this is the speed at the second-hand's tip. Other points on it travel slower.The closer the point is to the center, the slower its speed is. At the center, it spins, butthe linear speed is zero.
each degree is 60 minutes, and each minute is 60 seconds. 1/3600.
actually 1revolution=360 degrees, then 120 revolutions=360*120 (degrees)=43200degrees now degrees to radian is simple 43200 degrees=43200*PI/180=240pi radians now we can write as 120 revolution/minute=240pi radians/minute to convert minute into sec we multiply by 60 so as min is in denominator so we sill devide it by 60, 120 revolution/minute=240pi/60 radians/sec=4pi ans = 4pi
Divide the RPM by 60.
The magnitude of the angular velocity of the second hand of a clock is 6 degrees per second (360 degrees divided by 60 seconds), while the angular acceleration is zero since the second hand moves at a constant speed.
A clock's second hand makes one complete revolution each minute. Thus, by definition, it is rotating at one revolution per minute or one RPM. That's its "rotational velocity" and it is the same no matter how big or small the clock might be. The actual velocity that the tip of the second hand might trace out as it revolves around the center of the clock will vary with the length of the second hand. The longer the hand, the faster the tip moves around the circumference.
The ISS completes each orbital revolution of the Earth in about 90 minutes. 360 degrees/90 minutes = -- 4 degrees of angle per minute of time -- 4 minutes of angle per second of time -- pi/45 radians per minute
15 revolution per second 900/60=15 60 seconds in a minute divide by 60 to get number of revolution per second
If a turntable rotates 720 degrees in one second, it will complete 60 rotations in one minute because 720 degrees is equal to 2 rotations (720/360 = 2) and there are 60 seconds in a minute.
360
900000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
360
At 6:30, the hour hand is at 195 degrees, the minute hand is at 180 degrees, the second hand would be at 0 degrees. The hour and minute hands would also be 15 degrees apart.
1 per minute.