Right angles (90 degrees) will be formed.
A vertical angle is perpendicular to a horizontal base and equals 90 degrees
Horizontal component = 14 cos(38) = 11.032 lbs (rounded)Vertical component = 14 sin(38) = 8.619 lbs (rounded)
Slope is the angle compared with the horizontal, where the horizontal is 90° to the vertical, which can be measured with a plumb line. So, put a weight on a string, measure the angle of the string to the angle you are measuring, subtract 90° and that will give you the slope.
They are lines that are not horizontal nor vertical.
The ratio of the vertical distance to the horizontal distance is sometimes colloquially phrased as "rise over run"; the numerically calculated value is called "slope". Mathematically, slope can be thought of as the tangent (function) of the "angle of elevation".
horizontal lines are lines which may be at the angle of 00,1800,3600.if vertical lines stand on horizontal lines it is in the angle of 900
The angle formed by a horizontal line is 180o.
horizontal?
Intersects at a right angle, also vertical.
Construct a perpendicular line that intersects a horizontal line at 90 degrees and then bisect the vertical line with the horizontal line will give an obtuse angle of 135 degrees because 90 degrees+45 degrees = 135 degrees
A vertical angle runs up and down or from top to bottom or vise versa. A horizontal angle runs from left to right or vice versa.
Diagonal means across at an angle, not horizontal or vertical.
The angle that the velocity makes with the horizontal is called the launch angle. It can be calculated using trigonometry by finding the arctangent of the vertical component of the velocity divided by the horizontal component.
the special type of theodolite used to measure horizontal and vertical distance and horizontal angle.
A line that is at right angles to a vertical line is said to be horizontal.
A vertical angle is perpendicular to a horizontal base and equals 90 degrees
Get some graph paper, draw two axes and bisect them with a 45 degree sloping line. Next pick any point on that 45 degree sloping line and from that point draw a line parallel to the horizontal axis so that it intersects the vertical axis. Do the same thing from the point drawing a line parallel with the vertical axis so that it intersects the horizontal axis. These two lines represent represent the components of your vector and if you measure them they will be of equal length and thus of equal magnitude. For ANY angle of slope (other than 45 degrees) the two vectors will not be of equal length.