Fuse is an alloy of lead and tin.
i need a pic of both fuse pannels inside one and the one under the hood
Composition Means When You Compose A Story Or Put Something Together.
Percent composition can be used to calculate the percentage of an element/compound in a mixture. From the percent composition, you can also find the empirical formula. And from the empirical formula you can find the actual molecular weight.
how to calculate area of a wire
Both 12-2 and 14-2 wire have 2 wires in a single cord. Neither contains a ground wire. Size 12 wire is a larger wire than size 14 wire. Size 12 wire can carry more amperage without getting hot and burning up. They would not be used for house wiring or machinery since they do not have a ground wire.
pooda panni
The percentage of copper in a fuse wire is very small or non existent. Fuse wire is made from mixing different types of alloys together of aluminum, nickel, iron and chromium. The alloys result in compounds called cronifer and aluchrom. The composition of the different fuse wires results in how the characteristics of the fuse fault current is handled.
The size and composition of fuse wire is designed to "burn through" in an over current situation. That works fine as long as the current is lower than the fused rating. If you were to use the wire in the circuit then all your wire would essentially disintegrate in an over current situation.
NO. Usually the positive wire will have the fuse.
Why is it dangerous to replace a fuse with a wire that bypasses the fuse
The 15 amp fuse.
A circuit breaker does not have a wire fuse in it.
Fuse wire is designed to open under over current conditions. Just like a fuse.
yes there is a fuse in the fuse box. the wire will lead to it or to the ignition switch. But the fuse to amke the hot wire hot is in the under dash mounted fuse box.
how much copper is in copper wire
Isolate the cicuit in question, or turn off power altogether. Remove the burned/fused section of the fuse wire in the fuse carrier and replace with the recommended fuse wire. Turn power back on.
Metal with a lower melting point is preferred for fuse wire to reduce the risk of fire.