Both 12-2 and 14-2 wire have 2 wires in a single cord. Neither contains a ground wire. Size 12 wire is a larger wire than size 14 wire. Size 12 wire can carry more amperage without getting hot and burning up. They would not be used for house wiring or machinery since they do not have a ground wire.
2
14 gauge wire is smaller and is only good for 15amps of load. 12 gauge wire is a little bigger and is good for 20 amps of load, that is best case. there are many other factors that apply such as length of wire run, how long the power is applied, how many conductors are parrellel to each other etc.
1. The difference of two numbers are the numbers between them. The difference is found by subtracting the smaller number from the larger. In this case, 2 is subtracted from 3 (3-2) with a difference of 1. 3-2=1
There is a difference of 6.
2 wire has a live wire to energise the field where as the single wire alternator self energises and does not need the powered feed.
The main difference between 10-2 and 10-3 wire is the number of conductors they have. 10-2 wire has two conductors, typically used for a hot wire and a neutral wire. 10-3 wire has three conductors, typically used for a hot wire, a neutral wire, and a ground wire.
Both 12-2 and 14-2 wire have 2 wires in a single cord. Neither contains a ground wire. Size 12 wire is a larger wire than size 14 wire. Size 12 wire can carry more amperage without getting hot and burning up. They would not be used for house wiring or machinery since they do not have a ground wire.
The smallest two digit number is 00 (a number used as a wire gauge) and the largest is 99, so the difference between the largest and smallest 2-digits numbers is 99 (99 - 00)
because the wire telephone has wire in it Answer 2 Well, almost all telephones used today are electronic devices, including mobile phone, wire telephone and ip telephone. Wire telephone is just a sub branch of electronic telephone.
-5
Most of the current travels on the surface of the wire. The more strands the more surface area and the lower the effective resistance.
2 prong is a hot and neutral and a 4 prong is a 3 phase with a ground wire.3 pole 4 wire meaning 3 hots could be 240 volts or 480 volts
there is no difference
You can measure the phase difference between 2 pendulums by measuring the distance between the two. The amount it comes out to will be the difference.
2
In most cases the single wire sensor runs a temp gauge or temp light. The double wire sensor feeds info to the vehicle's computer and operates relays for the cooling fans. This may or may not be the case for your Saturn.