0
determine the estimated cost of a warehouse with the following parameters:
Building length—210 feet
Number of bays on the length side of the building—7 each
Building width—120 feet
Number of bays on the width of the building—4 each
Wall height above grade—22 feet
Depth to top of footing—12 inches
Floor slab—6 inches thick with wire mesh
Number of roof hatches—2 each
Number of personnel doors—4 each
Number of 14-foot-wide by 14-foot-high overhead doors—14 each
Number of 4-foot by 4-foot skylights—28 each
Fire sprinklers are not required
Separate male and female bathrooms are required
What else can I help you with?
Is an acre 210 x 210?
1 acre is approximately 208.71 feet × 208.71 feet (a square) 4,840 square yards or 43,560 square feet
What is the LCM of 120 and 210?
The LCM is 840.
What is 4 7ths of 210?
120 is four sevenths of 210.
120+90?
210
What is the original amount of a number when the new amount is 210 and has a 75 percent increase?
120 times 75%=90 90+120=210
Is 200 by 200 feet a acre?
It will be just under an acre. An acre contains 43,560 square feet. A closer dimension would be 210 by 210.
Is an acre 210 x 210?
1 acre is approximately 208.71 feet × 208.71 feet (a square) 4,840 square yards or 43,560 square feet
How many foot are on an acre?
The distance around is called the perimeter. You can't calculate the perimeter from the area, unless you know the shape. For example, a circle, a square, a 2:1 rectangle, a 3:1 rectangle, all have different perimeters for the same area.
Is 200ft x 2ooft acre?
It will be a little bit short of an acre. An acre contains 43,560 square feet. The conversion says that it would be closer to 210 by 210.
Is 200ftby200ft an acre of land?
An acre contains 43,560 square feet. The conversion says that 200 by 200 would be less than an acre. But 210 by 210 is just a bit more than an acre.
How many acres is a parcel of land that is 210 feet deep and 200 feet wide?
43560 sq ft = 1 acre 210 ft x 200 ft = 42000 sq ft = 42000 ÷ 43560 acre = 350/363 acre ≈ 0.964 acre
What is the square of a acre?
A perfectly square acre would be just a bit under 210 feet on each side. But an acre does not have to be perfectly square.
How do you measure a half acre?
To measure a half acre, you first need to know that one acre is equal to 43,560 square feet. Therefore, half an acre is 21,780 square feet. You can measure this area by creating a rectangular or square plot; for example, a rectangle measuring 210 feet by 104 feet would equal half an acre. Alternatively, you can use a measuring wheel, tape measure, or GPS device to outline and confirm the dimensions on the ground.
What is the length and width of half of an acre?
Half an acre is equivalent to 21,780 square feet. If you consider it as a rectangular shape, one possible dimension could be 210 feet in length and 104 feet in width. However, the dimensions can vary; for instance, it could also be 150 feet by 145.2 feet. The key is that the area totals 21,780 square feet.
Is 200x200 an acre?
200 by 200 what? Meters squared? Feet squared? Inches squared? Please add the units to your question so that it can be properly answered because it is impossible to say yes or no to this type of question if no units are available.
How much fence for 1 acre square?
If it is perfectly square, it will be just short of 210 feet per side. So you will need 840 feet of fence.
What in square yards and square feet is an area which is 125 feet by 210 feet?
The area is 26250 square feet or 2916.67 Square yards.
