The answer depends on the equipment that you have available.
The volume of 1 liter of water is 1 liter.
Take the gpm of the recirculating pump and multiply by 10/2.4 equal system volume. This is used to estimate expansion tanks. It good plus or minus 10% depending on new additions
How big is the pitcher? There are 4 quarts(US) in 1 gallon(US).
you subtract the weight of the water from the weight of the measuring cylinder and you get the volume of the stone
You could use Archimedes Principal. Fill a container (a bath, or tank) with enough water to cover the body, and measure the volume of water. Then, get the person to lie down fully in the water, and measure the level of the water again and calculate the new volume as if the tank held only water.. The difference in volume between the two measurement is the volume of the person's body. Another way to use the displacement method would be, if you can be sure to catch all the overflow, fill the cntainer to the top. get the person climb in and lie down and measure how much spills over the top... this works best if there is a spout at the side and you can fill the container up to the level of the spout.
1 quart
200 liters is closest.
To measure an amount of water in a very large pitcher, you could use a graduated container, such as a measuring cup or jug, to pour out specific amounts of water from the pitcher until you reach the desired measurement. Alternatively, you could use a flow meter or a water level sensor if the pitcher is equipped for such measurements. If neither is available, estimating by filling the pitcher to a marked level can also work, provided the pitcher has clear volume markings.
Hydrologists measure the volume of underground water in two ways. First, they use direct soil physics to estimate, and secondly, they use soil's physical parameters.
To estimate the volume of water, you can use the formula for volume: Volume = Length x Width x Height. Measure the length, width, and height of the container holding the water, then multiply these measurements together to get the volume. If the container is irregularly shaped, you can use the water displacement method by submerging the object in a known volume of water and measuring the increase in water level.
You would use water displacement (ie volume)
a bucket...
you can measure the mass by putting it on a balance and measure really quickly. the volume you can estimate an approximate answer by putting it in water and measuring its displacement.
The best unit of capacity to describe the amount of lemonade in a pitcher is liters or quarts, depending on the size of the pitcher. For example, if the pitcher holds 2 liters of lemonade, you would state that the capacity is 2 liters. To determine this, you can fill the pitcher with a known volume of water (like a liter measuring cup) and count how many times it fills the pitcher to find its total capacity. This approach provides a practical way to measure the volume of liquid accurately.
Uganda River is the Closest body of water
DETERMINE BTU THEN DIVIDE THE NUMBER BY 10,000, MULTIPLY BY 4 AND IT GIVES YOU A ROUGH ESTIMATE OF WATER HOLDING CAPACITY IN GALLONS. ALSO, DETERMINE LENGTH & DIAMETER OF BOILER, VOLUME IS CALCULATED BY THE FORMULA 3.14 x square of radius x length. Multiply by 0.7 and you also get a rough estimate of the volume of water...
The body of water that is closest to wales is the Atlantic ocean.