0
What is the cubic capacity of a body of water where the surface area is 54000sqm and the depth is 14m?
If the cross-section area is constant all the way down, then the volume is
(54,000 x 14) = 756,000 m3 = 0.000756 cubic kilometer.
If it tapers or spreads on the way down, then in order to calculate the volume,
we'd need to know the details on the how the shape of the sides varies with
depth.
What else can I help you with?
What is the Formula for water in a cylinder?
This is kind of tricky, but here are the basics: Volume is the surface area of the cylinder multiplied by the depth of the water. Do not mix feet and inches, convert all dimensions to feet or inches, depending on the application. To calculate the surface area, measure the inside diameter of the cylinder, divide the diameter by 2 and then multiply by Pi (3.1416). Multiply the surface area by the depth of the water and use following information for conversion: water is 231 cubic inches per gallon or 7.481 gallons per cubic foot.
How do you figure out cubic measurements?
A cubic measurement is a volume measurement. To calculate volume, multiply Area x Height (or Depth).
What the volume of a cylinder 2m dia x 2m depth?
The volume is 6.2832 cubic meters.
How much area does 8 cubic feet cover?
The answer depends on the depth to which the area is covered.
Formula for figuring how many gallons in a round tank?
First calculate cubic feet: 3.1417 x Radius² x Depth = cubic feetNext calculate gallons: Cubic ft x 7.47 = gallons
How do you calculate storage capacity of a dam in tmc?
To calculate the storage capacity of a dam in trillion cubic meters (TMC), you first need to determine the reservoir's surface area and the average depth. The storage capacity can be estimated using the formula: Capacity (TMC) = Surface Area (hectares) × Average Depth (meters) × 0.00001, where the factor 0.00001 converts the volume from cubic meters to trillion cubic meters. Ensure that the measurements are consistent and converted properly for accurate results.
What is the cubic capacity of 49 inches by 66 inches?
14 gallons (1.872 cubic feet) for every inch of depth.
How many cubic yards in a 7.5 depth pool?
That also depends on the pool's diameter if it's round, or length and width if it's rectangular. The capacity is going to be 0.2778 cubic yards (rounded) for every square-foot of area on the surface.
How do you calculate gallons in pool?
The answer depends on the shape of the pool. If the pool is of uniform depth, then its volume is the surface area times the depth. If the surface area is measured in square feet, and the depth is measured in feet, then the volume is in cubic feet.1 cubic foot = 6.2288 Imperial gallons.
Calculate the cubic capacity of a freezer?
Take the three dimensions. Length, width and depth. Multiply them together L x W x D This will give you the cubic capacity in the units uses. ie cubic feet, meters etc.
How would you calculate the cubic capacity of the bucket of an excavator?
To calculate the cubic capacity of the bucket of an excavator, measure the internal dimensions of the bucket: length, width, and depth. Use the formula for volume, which is length × width × depth. If the bucket is a more complex shape, you may need to approximate it to a rectangular prism or use water displacement for more accurate results. Finally, convert the volume from cubic inches or centimeters to cubic yards or cubic meters as needed.
Why is surface aree measured by square units and volume is measured in cubic units?
Surface area is two-dimensional. Volume has a third dimension: depth.
What is the square foot surface area required for 213000 gallons of water at 12 feet in depth?
213,000 gal / 7.48 gal /cubic foot =28,476cf /12ft(depth)=2373 sqft of surface area
What is the depth of a pool holding 64 cubic feet of water?
This is impossible to calculate without knowing the surface area of the pool.
At which depth below Earth's surface is the density most likely 9.5 grams per cubic centimeter?
It's about 3,500 km below the Earth's surface. (For all Earth Science people)
The pacific ocean has an approximate volume of 7.07271020 liters and a surface area of approximatly 1.62525108 KM2 Calculate the average depth of the pacific ocean?
To get the average depth, take the volume and divide it by the surface area. For this question, first convert litres into cubic kilometres. Then take this value and divide it by the surface area. You could also convert the volume to cubic metres and the surface area to square metres, but it might be more tedious.
How do you work out the capacity of a tank in liters from the dimensions?
Lenght in centimeters x Hight in centimeters x Depth in centimetres will give you the cotal capacity in cubic centimeters if you divide this amount by 1000 it will give to the total capacity in litres. 1 litre is 1000ccs.
