10 ms
10 m
It is the periodicity. If measured in the number of cycles per second, it is the frequency, and the measurement unit is a Hertz (Hz).
There is no formal definition of a jiffy. In electronics, it can refer to the period of the alternating current cycle. In most countries, the AC supply is at 50 or 60 Hz so that a jiffy is 1/50 or 1/60 of a second.
sec-1 This can be a reference to speed, though it is most commonly a reference to frequency. sec-1, or 1/sec can also be referred to as the Hertz (Hz), or cycle per second.
log2(6400/100) = log2(64) = 6
period is the time duration of one cycle of the waveform, and is measured in seconds/cycle. AC power at 50 Hz will have a period of 1/50 = 0.02 seconds/cycle. A 60 Hz power system has a period of 1/60 = 0.016667 seconds/cycle
time(seconds)=1/frequency(Hz) time=1/50 =0.02 seconds for 1 cycle
China is 220 volts at 50 Hz.
4ms
There is no inherent disadvantage of 50 Hz compared with 60 Hz, bearing in mind that systems that run at 50 Hz are designed to run at 50 Hz.
You find formulas down in the related links for conversion and calculation: Time period, cycle duration, periodic time to frequency in Hz.
60 cycles = 60 hertz
The motor, being designed to run on either a 50 or a 60 cycle (a.k.a. hertz) system , will turn faster.
The frequeny is the number of cycles per second, a cycle consists of the voltage changing direction twice. The power industry uses 50 Hz in Europe, 60 Hz in the Americas.
10 Hz 10 Hz
50 Hz is not available in the US. This is the frequency used in alot of European areas tho and it is the rate of Alternating Current as measured on an occiliscope in one cycle from 0 to + back to 0 to - and back to 0 (one Hz).... Short answer to your question is 60 Hz is more efficient (cheaper to operate) than 50 Hz.
It is a motor where the frequency of the AC voltage is 50 cycles per second. In U.S.A. 60 Hz is standard. 50 Hz would be overseas.