0
What else can I help you with?
What is the maximum number in unsigned 16-bits?
65536
How many pieces of 12 x 12 vinyl floor will it take to cover a room 16' x 16'?
256 pieces exactly.
What is the maximum number represents by 16 bit signed binary digits?
Plus or minus 65,535
What size of beam do you need to span 16 ft?
1 ft by 1.2 ft... verticaly 1.2ft
What length on a circumference would a 20 degree angle span on a 16 inch flywheel?
Length of arc, with angle x is pi*r*x/180 (where r is the radius) = pi*16*20/180 = 5.59 inches.
What is the maximum allowable ceiling joist span for a residential building?
The maximum allowable ceiling joist span for a residential building is typically around 16 to 24 feet, depending on the building codes and the size of the joists used.
What is the recommended spacing for deck floor joists?
The recommended spacing for deck floor joists is typically 16 inches on center.
What is the recommended spacing for floor joists in a residential construction project?
The recommended spacing for floor joists in a residential construction project is typically 16 inches on center.
What is the recommended spacing for 2x6 floor joists in a residential construction project?
The recommended spacing for 2x6 floor joists in a residential construction project is typically 16 inches on center.
How can I determine how to find floor joists in my home?
To find floor joists in your home, you can use a stud finder or look for nails or screws in the baseboards or ceiling. You can also measure 16 or 24 inches from a wall, as joists are typically spaced at these intervals. Another method is to locate a floor vent or electrical outlet, as they are often attached to joists.
How can I locate joists in a floor?
To locate joists in a floor, you can use a stud finder or tap the floor to listen for a solid sound indicating the presence of a joist. You can also look for nails or screws in the baseboards or ceiling below, as they are often attached to the joists. Another method is to measure 16 or 24 inches from a known wall, as joists are typically spaced at these intervals.
How can I locate floor joists in a room?
To locate floor joists in a room, you can use a stud finder or measure from a known reference point, such as a wall. Floor joists are typically spaced 16 or 24 inches apart, so measuring from a wall at one of these intervals can help you find them. You can also look for nails or screws in the floorboards, as they are often placed along the joists.
What is the maximum span on a double 2x12 beam supporting a 2nd floor load with no roof load?
About 5metres(16') but would have to be stress graded timber.
What is the span for interior floor decking?
I don't understand your question completely, but I think what you are asking is how far apart support can be for a subfloor or floor decking. It will vary with the type of construction, but for residential housing it's almost always 16 inches between the floor joists. That would be measured from the center of the joist to the center of the next joist.
What is thickness of sub floor needed?
The thickness of subfloor needed generally depends on how far apart your floor joists are located. In most cases, floor joists are 16" center-to-center and the most common thickness of subfloor is 3/4". Some homes will have 1/2". If your floor joists are farther apart, you will need correspondingly thicker subfloor to adequately support weight between the wider joists. Your city's building codes department will be able to specify what you need (some cities may have differing requirements).Another factor might be the kind of flooring you will install. For carpet, vinyl, laminate, wood and other non-rigid flooring types, the 1/2" or 3/4" will be adequate. For tile, the Tile Institute of America recommends no less than 3/4" subfloor on 16" centers floor joists - but with 1/4" backerboard installed on top of subfloor. See their website or contact your city codes department for specifics on a different span of joists.
How do you reinforce a floor that moves when someone heavy walks on it?
Reinforcing a floor that moves when someone heavy walks on it can be done by adding additional support beams or joists underneath the floor. You can also use bridging or blocking between the existing joists to add stability. It's important to identify the specific areas that are moving and target those for reinforcement.
How much weight per square foot will a standard wood framed floor hold?
The answer to this question depends upon several criteria: 1. The span of the floor framing members 2. The 'on center' spacing of the floor framing members 3. The nominal dimension of the floor framing members (2x12 etc.) 4. The grade and species of the wood 5. Size and location of any holes or notches in the framing members A typical residential floor designed for a 10 psf Dead Load, 40 psf Live Load and a deflection criteria of L/360 (mid span deflection limited to L in inches/360): 2x12 joists at 16" on center spacing, Spruce-Pine-Fir #2, will have an allowable max span of 17'-10". 2x12 joists at 16" on center spacing, Southern Pine #2, will have an allowable max span of 18'-10". 2x10 joists at 16" on center spacing, Spruce-Pine-Fir #2, will have an allowable max span of 15'-5". Random thoughts: Thinset ceramic tile with mortar will add about 10 psf dead laod. Location of very heavy objects can be critical when determining a floors capacity.
