0
What else can I help you with?
How many fence boards do you need for 34.5 feet of fence.useing 6 inch boards?
6in = 0.5ft 34.5ft/0.5ft = 69 You will need 69 of the 6in boards.
How many lineal meters in one square meter when measuring decking boards?
The answer will depend on the width of the decking boards.
How many 7 foot long 4 foot wide boards are need to cover 192 sq. feet?
7*4 =28 square foot boards 192/28 = 6.857142857142857 = 7 boards
How many lineal meters in 25 square meters when laying floor boards?
Lineal metres = Square metres/Width of the boards.
How many 1X6x12' deck boards to cover 800 sq ft?
How many 1x6x12 deck boards to cover 800 sq.ft
How do electricity generating boards measure electricity?
.
How can I fix a leaning fence in my backyard?
To fix a leaning fence in your backyard, you can start by digging a hole next to the leaning post and filling it with concrete for support. Then, prop up the post with braces until the concrete sets. Finally, reattach any loose panels or boards to secure the fence in place.
What ryhmes with towards?
Words, swords, boards, cords, fords, hords, lords,
How can I replace hardwood floor boards?
To replace hardwood floor boards, follow these steps: 1. Remove damaged boards by cutting and prying them out. 2. Measure and cut new boards to fit. 3. Install new boards by nailing or gluing them in place. 4. Sand and finish the new boards to match the existing floor.
How high should skirting boards be?
There is no set height - boards can range from 4 to 12 inches in height, or made to measure. It depends on your preferred style and room decor.
How can I replace deck boards effectively and efficiently?
To replace deck boards effectively and efficiently, follow these steps: Remove the old boards carefully using a pry bar or screwdriver. Measure and cut the new boards to fit the deck. Pre-drill holes for screws to prevent splitting. Secure the new boards in place with screws or nails. Seal or stain the new boards for protection.
How do you measure dry wall?
You measure it by the square foot. The common 'board' is 32 sf. larger boards are also made in many plants.
How do you measure how much drywall needed?
You figure out the square footage, and then the size and number of boards needed.
Disadvantages of positive discrimination?
A positive discrimination towards a group in society will result in a negative discrimination towards an other group in society. For example; positive discrimination towards women will result on a negative discrimination on men. Implying such a system will go against equality of citizenship. Putting women on boards of power because of the nature of their gender and to compensate for past exploitation, will be unfair towards men who worked as hard, or maybe harder, to achieve the same position.
What is the total linear feet of two boards that measure 8 feet and 16 feet?
24 feet.
How can I effectively cut boards from a log?
To effectively cut boards from a log, you can follow these steps: Use a chainsaw or a sawmill to cut the log into manageable sections. Measure and mark the desired board thickness on the log. Use a saw to cut along the marked lines to create the boards. Sand and finish the boards as needed for a smooth surface.
What are the steps for installing board and batten with plywood on a wall?
Measure and cut plywood to desired size for the boards. Attach plywood boards to the wall using a nail gun or screws. Measure and cut battens to fit between the boards. Attach battens over the seams of the plywood boards using a nail gun or screws. Fill any nail holes or gaps with wood filler. Sand the surface for a smooth finish. Prime and paint the board and batten wall as desired.
