0
What else can I help you with?
What metric wrench size is the next size smaller than 1 inch?
The next size smaller than 1 inch in metric wrench sizes is 25 mm. This is because 1 inch is equivalent to approximately 25.4 mm, and 25 mm is the closest standard metric size below that measurement.
What is the best metric unit to use for a piece of chalk?
Centimetres and/or millimetres - depending on the size of the piece !
What size in meters is a hectacre?
A Hectacre is a metric unit for surface area. 1 Hectacre = 10,000 sq. Meters or 2.47 Standard Acres
Metric units of capacity?
The metric unit for volume (capacity is the volume something holds) is the liter which is the same volume as 1,000 cu cm. This can be preceded by the metric prefixes to form "other" units, for example the milliliter (ml) is 1/1000 liter (and the same size as 1 cu cm), the centilitre (cl) is 1/100 liter. Some metric units of capacity are Liters, and Milliliters. 2 liters is equal to a 2 liter soda from the store. 250 milliliters equals 1 metric cup.
What metric unit is used when measuring the volume of an irregular-shaped object?
millilitre or litre - depending on size. Or possibly microlitre, kilolitre, megalitre etc.
What is the approximate area in sq in of a trade size 2 raceway?
A trade size 2 raceway typically has a cross-sectional area of approximately 2.0 square inches. This is based on standard dimensions, where a trade size 2 conduit usually has an inner diameter of about 2.375 inches. The exact area can vary slightly depending on the specific type of raceway, but 2.0 square inches is a common estimate.
What is the maximum allowable conductor fill of any trade size conduit used as a raceway?
It depends on the wiring, the current load in the wiring , and the distance. The NEC Code book has the charts for this.And the size of the conduit.
What percentage is the maximum allowable conductor fill of any trade size conduit used as a raceway?
It depends on the wiring, the current load in the wiring , and the distance. The NEC Code book has the charts for this.And the size of the conduit.
What is the size of metric ton?
A metric ton, also known as a tonne, is a unit of mass equivalent to 1,000 kilograms or approximately 2,204.62 pounds. It is widely used in the metric system for measuring large quantities of goods, especially in trade and transportation. The metric ton is denoted by the symbol "t."
Are metric and mm the same?
No
Size of oil draing plug for Honda accord 1991?
Metric size. Probably 17mm. Try your metric sockets until you get the correct size.
What is the size of bolt is used for the hood on a 1994 camaro?
There metric, get a metric set.
What is the size of a metric unit?
The size of any unit is, by definition, 1.
What is the metric size for a 350 Chevy?
5.7litres.
What is the largest size solid conductor permitted to be installed in a conduct raceway?
The largest size solid conductor that can be installed in a conduit raceway is typically governed by the National Electrical Code (NEC) guidelines, which specify that conductors must fit properly within the conduit without exceeding fill limits. Generally, a single solid conductor can be up to 4/0 AWG (American Wire Gauge) in size for most applications. However, specific installation conditions, such as the type of raceway and application, can influence this maximum size. Always consult the latest NEC code and local regulations for precise requirements.
What metric wrench size is the next size larger than 1 and 38 inches?
Next metric wrench size larger than 1-3/8inches = 35mm.
What size wrench fits m8 bolt?
A 10mm wrench, or if you don't have metric wrenches, a 13/32 wrench.
