The speed of a clock hand depends on what the clock hand indicates the second hand is 2pi per 60seconds, the minute hand is 2pi per 3600 seconds and the hour hand is 2pi per 216000 seconds.
It takes 1 minute to rotate 1 time.
what does the small hand on the clock mean
It doesn't matter where it is on the clock. If the clock is working properly, the speed of the hand is constant.The hand's angular speed is 360 degrees per minute = 6 degrees per second.For the linear speed, the tip of the second-hand revolves in a circle whose circumference is(2 pi) times (length of the hand) = 4 pi centimeters.It revolves once per minute. So the speed of the tip is (4 pi) cm/minute, or (240 pi) cm/hour.In numbers, the speed at the tip is:12.6 cm/minute2.09 mm/sec7.54 meters/hour0.000469 mile/hour593.7 feet/day12.593 furlongs/fortnight.Notice that this is the speed at the second-hand's tip. Other points on it travel slower.The closer the point is to the center, the slower its speed is. At the center, it spins, butthe linear speed is zero.
90 degrees
The minute hand of a clock turns about 360 degrees each hour.
its formula is 2pi r
No, clock speed is not measured in bytes. Clock speed is a measure of how many cycles a computer's CPU can perform in a second, typically measured in Hertz (Hz) or gigahertz (GHz). Bytes, on the other hand, measure data size or storage capacity.
it moves at one click every 60 seconds
it meas the clock hand it meas the clock hand it meas the clock hand
The short hand is the hour hand on a clock.
The little hand on the clock is known as the hour hand.
To calculate the speed of the minute hand on a clock, you need to know the distance it travels in a specific time period. Since the minute hand completes a full rotation every 60 minutes, you can calculate its speed by dividing the circumference it travels (2πr) by the time period (60 minutes). Given the length of the minute hand (5cm), you can use this information to calculate its speed in cm/minute.
The hands of a clock move at a constant speed, not slowing or speeding up. Therefore, the acceleration is a constant 0 rad/s2
the second hand
It takes 1 minute to rotate 1 time.
In an analog clock, the movement of the hour, minute, and second hands is based on a circular motion around the clock face. Each hand moves at a specific speed: the second hand completes a full rotation every 60 seconds, the minute hand every 60 minutes, and the hour hand every 12 hours. The distance traveled by each hand correlates with the time elapsed, as the constant speed of the hands allows for consistent measurement of time intervals. Thus, the combination of distance covered and the speed of movement enables accurate timekeeping.
what does the small hand on the clock mean