0
What else can I help you with?
What does .15 look like on a tape measure?
Well, .125 is 1/8 of an inch. If the tape measure is marked in sixteenths, 1/8 would be the 2nd line from the beginning of an inch. Then estimate or eyeball 1/4 of the way to the next line and that is rougly .15 on a tape measure. This is how I would figure this out. If someone knows a better way, please share.
What is 2.8 inches on a tape measure?
. I believe it’s actually two problems. One is converting the .8 feet into inches because that’s 8/10 of a foot and 8/10 of a foot.Is found by putting a ratio together 1 inch equals 12 above one is equal to 4/5, which is the fractional reference representationbe/5 reduced down to the most common denominator so basically take 2 feet which is 24 inches that’s one part of the problem and then the other parts at 8/10 of a foot or 4/5 and then you’ve got to be able to add the inches in to the 2 feet tenths of a foot is equal to 12 over one is equal to 4/5 and if you do the math that comes out to 8 inches 3/5 so I believe the answer is 32 inches and 3/5 after pontificated here which is probably nonsense. I’m gonna try with the tape measure.
How do you measure 0.80 on a tape measure?
Well, darling, grab yourself a tape measure with markings in inches and fractions of an inch. Locate the 3/4 inch mark, which is equivalent to 0.75. Then, eyeball the space between 3/4 and 1 inch, split it in half, and voila, you've got yourself 0.80 inches. Easy peasy lemon squeezy!
What is .3 inches on a tape measure?
A little bit more than 1/4
What is 0.575 on a tape measure?
The answer depends on the units used for the tape measure.
What is 2.2 inches on a tape measure?
On a tape measure, 2.2 inches would be the distance measured from the starting point on the tape measure. Each inch on a tape measure is typically divided into smaller increments, such as eighths or sixteenths of an inch, allowing for precise measurements. In this case, 2.2 inches would fall between the 2-inch mark and the 3-inch mark on the tape measure, indicating a measurement slightly over 2 inches.
What is 5.2 inches on a tape measure?
5.2 inches on a tape measure is just slightly more than 5 inches. It is located between the 5-inch and 6-inch marks, specifically 2/10 of an inch past the 5-inch mark. On a standard tape measure, you would find the 5-inch mark clearly labeled, and the additional 0.2 inches would be measured in tenths of an inch after that.
What does 10.3 look like on a tape measure?
On a tape measure, 10.3 inches is represented as 10 inches and 3 tenths of an inch. Since there are 10 marks between each inch, you would find the third mark after the 10-inch line. This mark indicates 0.3 inches, making it the precise position for 10.3 inches on the tape measure.
What is 5.1 inches on a tape measure?
On a standard tape measure, 5.1 inches would be represented by the fifth line after the 1-inch mark. Each inch is divided into 16 equal parts, so the 5.1 inch mark would fall between the 5-inch mark and the 6-inch mark. It is important to note that some tape measures may have additional markings for greater precision, such as 1/8 or 1/16 inch increments.
What is .30 inches on a tape measure?
.30 inches on a tape measure is a little less than one-third of an inch. It can be found by locating the 1/4 inch mark (which is 0.25 inches) and then measuring an additional 1/20 of an inch past that mark. On most tape measures, this would be represented as a small division between the 1/4 inch and 3/8 inch marks.
What is 0.94 on a tape measure?
On a tape measure, 0.94 represents 94 hundredths of a unit, typically in inches or centimeters. This means it is just short of 1 unit, specifically 7/8 of an inch or approximately 24 centimeters. To visualize this on a standard tape measure, you would find the 7/8 mark, which is slightly before the 1-inch mark.
What is 14.875 on a tape measure?
On a tape measure, 14.875 inches is represented as 14 inches and 7/8 of an inch. The decimal .875 converts to 7/8, indicating that it is three-quarters of the way between 14 and 15 inches. To find this mark, locate the 14-inch mark and then move to the 7/8 mark, which is the seventh tick mark after the 14-inch line.
What is 3.35 inches on a tape?
3.35 inches on a tape measure is a little over 3 and one-third inches. It can be found by locating the 3-inch mark and then measuring an additional 0.35 inches past it. This additional measurement corresponds to just over one-third of an inch, as there are 0.33 inches in one-third. On a standard tape measure, you would see the 3-inch mark and a bit more toward the next 4-inch mark.
How do you measure a 3-inch pipe?
Use a tape measure!
Where is 2.9375 on a tape measure?
To locate 2.9375 on a tape measure, first convert it to a fraction: 0.9375 is equivalent to 15/16. Therefore, 2.9375 inches is 2 inches plus 15/16 of an inch. On a tape measure, find the 2-inch mark and then count 15 small divisions to the right, which represent 1/16-inch increments, to reach the precise measurement of 2.9375 inches.
What is 4 marks on the inch part using the 16th of an inch part on a tape measure converted into inch fractions?
if each mark is 1/16 inch then 4 marks is 4/16 inch = 1/4 inch
How do you get the width of a triangle?
You use a ruler or tape measure.
